Digital Krebs Stormer Viscometer varnishe adhesives pastes Paint Viscosity Meter

Description: Digital Krebs Stormer Viscometer varnishe adhesives pastes Paint Viscosity Meter1.DescriptionStormer viscometer is a test instrument used to determine the viscosity of paint and other paints with KU value. This instrument can simultaneously display the KU value, CP (centipoise), g (gram), and room temperature of the measured sample viscosity. The design basis of this instrument is ASTM-D562 standard and GB9269-88 standard.2.What's Included?1*Stormer host1*paddle1*Measuring cup1*Instruction1*Certificate3.Features&HighlightsThis instrument is controlled by a microcomputer. The stirring blade is driven by a special constant speed motor to rotate at a speed of 200r/min. The resistance torque of the stirring blade rotating in the tested sample is converted by the computer to KU value(Krebs K rebs) unit (KU) to produce 200 A logarithmic function of the load required for r/min speed, generally used to express the viscosity for brushing and rolling). The operator only needs to insert the stirring blade into the sample to be tested to the specified depth, and the KU value corresponding to the sample can be directly read from the instrument, CP (centipoise) g (gram).4.Weights&DimensionsDimensions: 210mm*180mm*500mm (length * width * height)Weight: 10kg5.Specifications *Measuring range: 40.2KU-141.0 KU (KU) value 32g-1099g (load value), 27 cp-5250cpMeasurement accuracy: ±2% of full scale Measurement repeatability : ±1% of full scale The stirring shaft speed: 200 r/min±0.5 r/min*Container capacity: about 500ml*Input voltage: 110V 60HZ*Power: 10W Test environment:1. The instrument should be placed on a firm and flat surface away from the interference of strong air currents, strong magnetic fields, strong electric fields, and strong electric pulses.2. To ensure the safety of the operator, the power socket in the laboratory should be reliably grounded.3. The temperature in the laboratory should be 23±2, and the relative humidity should be no more than 75.4. The temperature of the sample should be 23±0.2. Operation and use: 1. Take the instrument out of the box and place it on the workbench. 2. Take out the stirring blade from the packaging box, insert it into the sleeve of the rotating shaft according to the outline drawing, and fix it with the jacking screw. Note that the jacking screw should be on the flat opening of the stirring blade. 3. Plug in the power plug and turn it on without the power switch, the LCD will display the KU value, and the g reading is zero. 4. Put the sample to be tested into the container that comes with the instrument, and the liquid level is about 10mm away from the container mouth. 5. Place the container with the sample to be tested on the container base, press down the lifting handle, and immerse the stirring blade in the sample to be tested, and the mark on the shaft of the stirring blade is flush with the liquid surface. The instrument automatically starts to run. 6. After a few seconds, the display will display the KU value of the sample to be tested, CP (centipoise) g (gram) (the sample to be tested must be stirred for a few seconds to achieve uniformity, that is, dynamic equilibrium, the data displayed at this time is accurate) 7. After the measurement is over, raise the lifting handle to a high place, and there is a limit device near the highest position, which can keep the instrument in this position. The instrument stops rotating and enters the standby state again. 8. The propeller blade is a sensor connected to the instrument. When rotating the propeller blade, please do not pinch it by hand. Similarly, when installing the propeller blade, in order to align the deflection of the stirring propeller blade with the tightening screw, do not vigorously rotate the sleeve of the shaft, otherwise it will damage the sensor and cause measurement errors. Method: Press down the lifting handle to make the instrument idle, rotate it to a suitable position, and then install the blade 6. This product comes with a one-year warranty. If the instrument is damaged due to improper use or human error, it is not covered by the warranty Matters needing attention 1. There are precision measuring parts in the chassis of this instrument, so handle it with care. 2. This instrument is a special-purpose instrument, if special personnel do not disassemble the outer shell of the instrument, so as not to affect the measurement accuracy of the instrument. 3. When the instrument is temporarily not in use, the lifting handle of the instrument should be kept on the upper limit device, and should not be placed in a lower position, otherwise it may cause inflexible lifting. 4. It should be sent to the relevant metrological supervision department for inspection once a year. PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Dec 12, 2024 at 01:04:23 PST, seller added the following information:

Price: 476.08 USD

Location: Chino, California

End Time: 2025-01-12T07:01:06.000Z

Shipping Cost: 0 USD