Cutting Speed 3-3.5S Electric Rebar Cutter Cutting up to 3/4" 4-20mm Rebar 1250W

Description: Cutting Speed 3-3.5S Electric Rebar Cutter Cutting up to 3/4" 4-20mm Rebar 1250W♥♥Welcome to Yunchenmj001♥♥ Description Safe and efficient cutting is never just a dream! This 1250W electric rebar cutter will provide you with both a safe and efficient cutting experience. It can cut your rebar in about 3-3.5 seconds without sparking, providing you with a good working environment. And its rugged material will last you a long time! Key Features High Efficiency: It uses a 1250W high-power motor that can cut the steel for you in 3-3.5 seconds, which improves your work efficiency. All-copper Motor: The1250W pure copper coil motor driven by a hydraulic pump ensures the stability of the electric rebar cutter, which means it has excellent power and low noise to cut at lightning speed! Wide Cutting Range: It can cut rebar in the size range of 4-20mm (3/20"-3/4") for you, which can meet your various cutting needs. Good Safety: Compared with the traditional steel cutting method, the use of this product does not produce sparks and is without smell, bringing you a safer cutting operation. Good Heat Dissipation: It has a scientific exhaust hole design at the rear, which greatly improves the heat dissipation of the machine, making it more stable in operation while also extending its service life. Easy to Use: It's designed for one-touch operation, just plug it in, push the button, and start cutting in seconds! Wide Applicability: The cutter on its headstock is reversible on four sides and the cutter on the shaft can be reversible on two sides. And the adjustable bolt design makes it easy to cut different sizes of steel with hardness below 25. Ergonomic Design: Its rear handle and side handle are ergonomically designed to give you a comfortable grip and convenient operation, bringing you a better experience. High Portability: We provide a protective case with a handle for your electric rebar cutter and its proper weight for your daily use. And the interior of the protective case with foam lining can well prevent the machine from damage due to impact. Durable Material: The machine is made of hard cast iron, which has good corrosion resistance and rust prevention ability. Its blades are made of Cr 12 MoV with good hardness, so you can use it for a long time and still bring you better cutting results! Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible. Details Loop Nut: The front of the machine is designed with a loop nut, making it well-sealed and more stable so that you can use it for a long time. Needle Roller Bearing: It uses a needle roller bearing to drive the motor rotation, which can make the motor run more smoothly and achieve a minimum friction and minimum power consumption, bringing you a better user experience. Multiple Screws: The multiple screws fixed to the head ensure the safety and longevity of the electric rebar cutter. Long Power Cord: Its power cord is up to 2.5m/ 8.2ft, allowing you to work without constraint. Oil Jug: We have an oil jug for you to easily change or add hydraulic oil. Application It is suitable for construction sites, factory workshops, railroad construction, bridge construction, etc. It can cut rebar, round steel, medium carbon steel, low carbon steel, etc. with a hardness of less than 25. Specification Model: RC-20 Color: Gray, Green Use: Cutting off Steel Bars Material: Cast Iron Machine, Cr 12 MoV Blade Hydraulic Oil Type: 46# Hydraulic Oil（Not Included） Plug Voltage: U.S. Plug 110V Power: 1250W Power Cord Length: 2.5m/ 8.2ft Cutting Range: 4-20mm (3/20"-3/4") Cutting Speed: 3-3.5s Product Size: 41*11.5*22cm/ 16.1*4.5*8.7in Package Size: 48*19.5*28.5cm/ 18.9*7.68*11.22in Net Weight: 13kg/ 28.66lbs Gross Weight: 20kg/ 44.09lbs Package Included 1* Electric Rebar Cutter 1* Protective Case 1* Oil Jug 2* Blades Other Needed Accessories NotesPlease place it horizontally on the headstock before use with the rebar at an angle of 90° to the central axis of the headstock.Please do not use it to cut materials that exceed the specified diameter or strength, as this may affect the service life of the machine.Please release the switch immediately after cutting to the end to avoid damage to the machine by keeping the switch pressed.It is normal for the pump body to heat up after being cut off or bent about 50 times continuously, please wait until the pump body cools down to normal temperature before using.Please periodically check whether the head frame, pump body, and other connections of the nut are loose, if loose, need to tighten, so as not to affect the use of the machine.Please change the hydraulic oil every six months.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

Price: 262.08 USD

Location: Chino, California

End Time: 2024-12-04T02:31:53.000Z

Shipping Cost: 0 USD