Creality 3D PEI Magnetic Flexible Heated Bed 235 x 235mm Spring Steel Build Surf

Description: Creality 3D PEI Magnetic Flexible Heated Bed 235 x 235mm Spring Steel Build SurfPEI Magnetic Flexible Heated Bed.- Upgraded 3D Printer hotbed surface.Applicable: Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 5 Pro.Flexible, removable, can stick to magnetics very well. High strength and heat resistance.Compatible with PLA、PETG、PEEK、ABS and other most filaments.No more tape, no more glue, no more shovel, and release your printing anxietyEasy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.How to choose the suitable 3D Printer Build Plate? Smooth PEI Build PlatePC Spring Steel MagneticRemovable Magnetic Build SurfaceCarborundum GlassStandard configuration of the printerNoneEnder-3S1/Ender-3V2NEO, Ender-3S1 PlusEnder-3 ProEnder-3V2, Ender-5PLUS, Ender-3Neo, Ender-3Max (Neo), CR-10Smart etc,.Max-temperatureRecommended 80°C(Support printing at 100°C; it is generally recommended to keep it at or below 80°C, and it will lose its magnetism if it is used for a long-time above 80°C)Recommended 80°C(Support printing at 100°C; it is generally recommended to keep it at or below 80°C, and it will lose its magnetism if it is used for a long-time above 80°C)Recommended 80°C.(Support printing at 100°C; it is generally recommended to keep it at or below 80°C, and it will lose its magnetism if it is used for a long-time above 80°C) Max_400℃（Normally Printing Setting is around 110℃）Build SurfacePEI stick filmPC CoatingPC CoatingTempered Glass Composite CoatingThe effect of the bottom surface of the modelFlat and Smoothslightly rough textureslightly rough textureFlat and SmoothBed AdhesionGreat for PLA, TPU, WOOD, PLA-Wood, PETG etc,.Great for PLA, TPU, WOOD, PLA-Wood, PETG, ABS, PC, ASA etc, high temperature consumablesGreat for PLA, TPU, WOOD, PLA-Wood, PETG etc,.Flat and SmoothHow to remove the modelRemove the model after cooling.For high temperature printing, it is recommended to cool down slightly before taking the model.As the PC Spring Steel has a strong viscosity,①For printing the high-temperature consumables need to cool down 【slightly to not be hot 】 or wear anti-scalding gloves to remove the model. To prevent the sticker fro being torn off after the model removed in the cools down in some cases.②For printing smaller models or models with a very low height, it is recommended to add brim when printing to facilitate removal of the modelRemove the model after cooling.For high temperature printing, it is recommended to cool down slightly before taking the model.Remove the model after cooling.For high temperature printing, it is recommended to cool down slightly before taking the model.

Price: 24.99 USD

Location: New Jersey/Los Angeles

End Time: 2024-08-21T18:28:08.000Z

Shipping Cost: 4.99 USD