CONTEC ECG Machine 1/3/12 Channels Electrocardiograph EKG Monitor 12 Leads FDA

Description: ambulatory blood pressure monitor FDA Approved ECG Machine 1/3/6/12 Channel Electrocardiograph 12 Leads ECG Monitor Description ECG90A Handheld 1 Channel ECG Machine+USB Cable+PC Software+Printer Introduction ECG90A is an Electrocardiograph which can collect 12-lead ECG signal simultaneously and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, case database management. Note: The device sold to the countries and regions that have FDA certification requirement does not support automatic analysis function. Function 1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal. 2)Particular and high-accuracy digital filter eliminates baseline drift, no distortion to ECG waveform, greatly enhances anti-baseline drift capacity, convenient for waveform judgment. 3)Display of 1/3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing. 4)Real-time and continuously record clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.). 5)Adopt high-resolution thermal printing system, no need for any adjustments. Recording frequency: up to 150 Hz. 6)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden. 7)Optional SD card stores up to 100 cases, which is convenient for doctor to review case and statistic. 8)In review mode, case waveform stored can be checked, measurement parameter and diagnosis information can be automatically analyzed. 9)Multi- language(Chinese, English) interface and report. 10)Optional ECG-Sync software, connect with PC by USB2.0 interface to form a ECG workstation, import real-time data to the software for analyzing and report printing, and old cases stored in Electrocardiograph can be uploaded to PC. 11)Power supply: AC/DC and built-in rechargeable lithium battery. In optimal DC state, up to 4-hour standby time, continuous print 90-minute and 150-ECG, which meets the requirements of visiting a patient at home and body examination. Performance Input mode: floating and defibrillation protection Frequency response: Rated input amplitude Input frequency and waveform Relative output response 1.0 0.67Hz~40Hz, Sine wave ±10%a 0.5 40Hz~100Hz, Sine wave +10 %, -30 %a 0.25 100Hz~150Hz, Sine wave +10 %, -30 %a 0.5 150 Hz ~ 500 Hz, Sine wave +10 %, -100 %a 1.5 ≤1Hz,200ms, Triangle wave +0 %, -10 %b a relative to 10Hz b relative to 200 ms Time constant:≥ 3.2s CMRR: >105dB Filter: power frequency(AC50/60 Hz), EMG(25 Hz/35 Hz (-3 dB)), baseline drift filter Recording way: thermal printing system Specification of recording paper: 50 mm(W)×20 m(L) high-speed thermal paper Time base selection(paper speed): 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s, error: ±5% Gain control(sensitivity): 2.5, 5, 10, 20 mm/mV, accuracy is ±2%; Standard sensitivity: 10 mm/mV±0.2 mm/mV Recording mode: auto mode, rhythm mode and manual mode Measurement parameters: HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1) Safety classification: Class I, type CF defibrillation-proof applied part Polarization resistance voltage: ±610mV Noise level: ≤12 µVp-p ECG signal input sampling frequency: 32 kHz Waveform data processing sampling frequency: 1 kHz Sampling accuracy: 24-bit The minimum detection signal: 10 Hz, 20 µV(peak-peak value) deflected sinusoidal signal can be detected Pacing detection channel: standard II Accuracy of input signal: ±5% Amplitude quantization: ≤5µV/LSB Interchannel time deviation: <100 µs Power supply: AC: 100V~240V(50/60Hz) DC: 7.4V/2000mAh rechargeable lithium battery Degree of protection against ingress of liquid: IPX0 Working mode: continuous working Accessories Standard configuration: A lead cable A limb electrode A chest electrode A thermal recording paper A power cord An earth wire A user manual A power adapter Physical characteristic Working environment Temperature: 5℃~40℃ Relative humidity: 25%~95%(non-condensing) Atmospheric pressure: 700 hPa~1060 hPa Transport and storage environment Temperature: -20 ℃～+55 ℃ Relative humidity: ≤95% Atmospheric pressure: 500 hPa~1060 hPa Dimension: 207mm(L)×96mm(W)×62mm(H) Weight: 0.5Kg ECG100G Portable 1 Channel ECG Machine+Printer Introduction ECG100G is a kind of single channel electrocardiograph, which features in printing ECG waveform with thermal printing system, prompting for "Lead off" or "Lack of paper", multi-language interface, recording ECG waveform with manual or auto mode, convenient to operate. Features 1)Operation 2.7" STN-LCD, accurate and clear ECG waveform and working state display, economical to save recording paper. Touch keyboard, simple and convenient to operate. 2)Functions Adopt digital signal processing technology to get high-quality ECG waveforms via AC filter, baseline filter and EMG filter of ECG signal. Real-time record single-channel ECG waveform and annotation(including lead mark, sensitivity, paper speed and filter state, etc.). Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz. In AUTO mode, finish all operation by pressing the button once, which improves work efficiency. Multi-language (Chinese, English, French, Italian, Turkish, Spanish and German) interface and report. 3)Power supply AC/DC, built-in rechargeable lithium battery. In optimal DC state, up to 7h standby time, continuous print up to 4h, record up to 160 ECG waveform. Parameters Working environment 　　　　Temperature: 5℃~40℃ 　　　　Relative humidity: 25%~80%(non-condensing) 　　　　Atmospheric pressure: 700hPa~1060hPa Transport and storage environment 　　　　Temperature: -40℃~+55℃ 　　　　Relative humidity: ≤95% 　　　　Atmospheric pressure: 500hPa~1060hPa Input mode: floating and defibrillation protection Frequency response: 0.05Hz ~ 150Hz(-3dB~+0.4dB) CMRR: >60dB, >100dB(add filter) Time constant:≥ 3.2s Patient leak current: <10µA Calibration voltage: 1mV Sensitivity: 5, 10, 20 mm/mV ±5%, standard sensitivity: 10mm/mV±2% Noise level: ≤15µVp-p Input circuit current: ≤50nA Input impedance: ≥50MΩ Sampling accuracy: 12-bit Safety classification: class Ⅰ, type CF and defibrillation-proof applied part Recording mode: thermal printing system Paper size: 50mm(W)×20m(L) Sampling frequency: 800Hz Polarizing voltage: ±300mV EMG interference filter: 35Hz(-3dB) AC filter: 50Hz/60Hz(-20dB) Paper speed: 25, 50mm/s,±5% Power supply: AC: 100V~240V(50/60Hz) DC: 7.4V/2000mAh rechargeable lithium battery Fuse specification: two AC time lag fuse(φ5×20mm), T1.6AL250V Waterproof degree: IPX0 Working mode: continuous working Dimension: 315mm(L)×215mm(W)×77mm(H) Weight: 1.5Kg Accessories A lead cable A limb electrode A chest electrode A thermal recording paper A power cord An earth wire A user manual ECG300G Handheld 3 Channel ECG Machine+USB Cable+PC Software+Printer Introduction ECG300G is an electrocardiograph collecting 12-lead ECG signal simultaneously and printing ECG waveform with thermal printing system, which features in, recording and displaying ECG waveform with manual or auto mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, case database management. Features 1)Operation 3.5" color LCD, accurate and clear ECG waveform and working state display, economical to save recording paper. 2)Functions Sync collection for 12-lead ECG, adopt digital signal processing technology to get high-quality ECG waveforms via AC filter, baseline filter and EMG filter of ECG signal. Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing. Multiply printing modes and formats, including manual, auto 4*3, auto 3*4+1, auto 3*4, auto 2*6+1, auto 2*6, auto 3-2+1, auto 3-2, auto 1*12+1, auto 1*12, rhythm 4, rhythm 3 and rhythm 2, etc. Waveform length printed can be adjusted, and with timing print function, which meets different requirements. Built-in memory stores up to 1000 cases, convenient for case review and statistic. Multi-language(Chinese, English, Spanish, Turkish, Polish, Italian, French, German, Portuguese, Kazakstan, Russian, Ukrainian, Serbian and Slovenian) interface and report. 3)Power supply AC/DC, and in optimal DC state, built-in rechargeable lithium battery can continuously work for 10h, print for more than 3h and 260-ECG, which meets the requirements of visiting a patient at home and body examination. Parameters Working environment 　　　　Temperature: 5℃~40℃ 　　　　Relative humidity: 25%~80%(non-condensing) 　　　　Atmospheric pressure: 700hPa~1060hPa Transport and storage environment 　　　　Temperature: -40℃~+55℃ 　　　　Relative humidity: ≤95% 　　　　Atmospheric pressure: 500hPa~1060hPa Input mode: floating and defibrillation protection Frequency response: 0.05Hz ~ 150Hz(-3dB~+0.4dB) CMRR: >60dB, >100dB(add filter) Time constant:≥ 3.2s Patient leak current: <10µA Calibration voltage: 1mV Sensitivity: 2.5, 5, 10, 20, 40 mm/mV ±5%, standard sensitivity: 10mm/mV±2% Noise level: ≤15µVp-p Input circuit current: ≤50nA Input impedance: ≥50MΩ Sampling accuracy: 12-bit Safety classification: class Ⅰ, type CF and defibrillation-proof applied part Recording mode: thermal printing system Auto record: set record according to auto record format and mode, automatically switching leads, measuring and analyzing. Rhythm record: set record according to rhythm record format and mode, automatically measuring and analyzing. Manual record: set record according to record format, manually switching leads. Measurement parameters: HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1) Paper size: 80mm(W)×20m(L) Sampling frequency: 1000Hz Polarizing voltage: ±500mV EMG interference filter: 25Hz/35Hz(-3dB) AC filter: 50Hz/60Hz(-20dB) Paper speed: 　　　　Auto record: 5, 6.25, 10, 12.5, 25, 50mm/s, ±5% 　　　　Rhythm record: 5, 6.25, 10, 12.5, 25, 50mm/s, ±5% 　　　　Manual record: 5, 6.25, 10, 12.5, 25, 50mm/s, ±5% Power supply: 　　　　AC: 100V~240V(50/60Hz) 　　　　DC: 7.4V/2000mAh rechargeable lithium battery Fuse specification: two AC time lag fuse(φ5×20mm), T1.6AL250V Waterproof degree: IPX0 Working mode: continuous working Dimension: 315mm(L)×215mm(W)×77mm(H) Weight: 1.6Kg Accessories A lead cable A limb electrode A chest electrode A thermal recording paper A power cord An earth wire A user manual ECG-Sync software+USB cable ECG1200G Handheld 3/6/12 Channel Touch ECG Machine+USB Cable+Printer 1111MicrosoftInternetExplorer402DocumentNotSpecified7.8 磅Normal0 Introduction ECG1200G is an electrocardiograph which can collect 12-lead ECG signal simultaneously and print ECG waveform with thermal printing system. It features in, recording and displaying ECG waveform in Manual mode, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting rhythm lead funtions. Function 1)Sync collection for 12-lead ECG, a sampling accuracy of 24-bit can get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal. 2)3/6/12-lead ECG waveform and other information such as print mode, sensitivity, paper speed, filter can be displayed in one screen, convenient for contrastive diagnosis. 3)Multiply printing modes and formats, including auto 12x1, auto 6x2+1 (rhythm lead), auto 6x2, auto 3x4+2 (rhythm lead), rhythm 12, rhythm 10, rhythm 8, rhythm 6, manual, etc. Trend chart and histogram of P-R interval can be printed, waveform length printed can be adjusted, and with time print function, which meets different requirements. 4)Paper speed: 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s. 5)Built-in large capacity memory, convenient for case review and statistic. 6)Multi-language(Chinese, English, Turkish, Portuguese, German, Russian, Kazakh and other languages) interface and report. 7)In optimal DC state, up to 10-hour standby time, continuous print more than 3-hour, which meets the requirements of visiting a patient at home and body examination. Performance Input mode: floating and defibrillation protection Frequency response: Rated input amplitude Input frequency and waveform Relative output response 1.0 0.67Hz~40Hz, Sine wave ±10%a 0.5 40Hz~100Hz, Sine wave +10 %, -30 %a 0.25 100Hz~150Hz, Sine wave +10 %, -30 %a 0.5 150 Hz ~ 500 Hz, Sine wave +10 %, -100 %a 1.5 ≤1Hz,200ms, Triangle wave +0 %, -10 %b a relative to 10Hz b relative to 200 ms Time constant:≥ 3.2s CMRR: >105dB Filter: power frequency(AC50/60 Hz), EMG(25 Hz/35 Hz (-3 dB)), baseline drift filter Recording way: thermal printing system Specification of recording paper: 210 mm(W)×20 m(L) high-speed thermal paper Time base selection(paper speed): 12.5 mm/s, 25 mm/s, 50 mm/s, error: ±5% Gain control(sensitivity): 5, 10, 20 mm/mV, accuracy is ±2%; Standard sensitivity: 10 mm/mV±0.2 mm/mV Recording mode: auto mode, rhythm mode and manual mode Measurement parameters: HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1) Safety classification: Class I, type CF defibrillation-proof applied part Polarization resistance voltage: ±610mV Noise level: ≤12 µVp-p ECG signal input sampling frequency: 32 kHz Waveform data processing sampling frequency: 1 kHz Sampling accuracy: 24-bit The minimum detection signal: 10 Hz, 20 µV(peak-peak value) deflected sinusoidal signal can be detected Pacing detection channel: standard II Accuracy of input signal: ±5% Amplitude quantization: ≤5µV/LSB Interchannel time deviation: <100 µs Power supply: AC: 100V~240V(50/60Hz) DC: 14.8V/3500mAh rechargeable lithium battery Degree of protection against ingress of liquid: IPX0 Working mode: continuous working Accessories Standard configuration: A lead cable A limb electrode A chest electrode A thermal recording paper A power cord An earth wire A user manual Physical characteristic Working environment Temperature: 5℃~40℃ Relative humidity: 25%~95%(non-condensing) Atmospheric pressure: 700 hPa~1060 hPa Transport and storage environment Temperature: -20 ℃～+55 ℃ Relative humidity: ≤95% Atmospheric pressure: 500 hPa~1060 hPa Dimension: 340mm(L) × 320mm(W) × 85mm(H) Net weight: 3.2Kg Certification SFDA, CMC, CE, FDA. Payment 1.We only accept payment to us through Paypal .Paypal is the safest and quickest way to pay online and offers seller and buyer protection. 2.Please pay within 2 days so as to avoid unnecessary delays and to ensure you get your item ASAP. 3.Buyers will receive the transaction notification from eBay within 24 hours. We reserve the rights to cancel the order if the buyer does not pay us or contact us for payment within 7 business days after auction end. 4.Payment must be received unless buyer has contacted us with any specific reasons. An unpaid strike will be sent if the item has not been paid after 14 days. Shipping 1.Our shipping rates include the cost of shipping, handling, packaging,custom fees are not included,buyers pay the taxes. 2.We usually shipped out the items the next business day after payment has been verified (Sat. & Sun. excluded.) 3.We ship items to USA/AU/CA/IT/FR/MX/SG/NL/PO/IE/PT by E-Package, other country by China Air mail and Singapore Airmail. It Usually take about 5-25 business days. Terms of Sale Buy safe Products The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item. If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health. The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG) with the code 197923, and certified by FDA of United States and CE,TUV of Europe.The Fingertip Pulse Oximeter that is FDA 510K Approved. About Us Contec Medical Systems focusing on research, manufacture and distribution of medical instruments,was founded in 1992 as a high-tech company.At present there are more than 1200 employees in our company.Our product line covers a wide range of 13 categories.Most of the domestic hospitals are our customers.Contec hopes to cooperate with international companies to supply more innovative design and advanced technology products We sincerely welcome you to become one of our global partners.We are looking forward to establishing a successful business relationship with you. Contact Us Whatsapp/Wechat/Mobile:+86 18233598090 Please contact us first if you are not satisfied with the item when you receive it or haven't received item after 30 days, We will try our best to solve any problem. Open case and negative feedback is not conducive to solve the problem for both sides. Hope you can understand!All emails will be answered within 24 hours on weekdays(but within 48hours on weekends).Please don't hesitate to contact us with any queries or comments about our items or your problem. Whatsapp/Wechat:+86 18233598090 il.com

Price: 269 USD

Location: Elk Grove Village, Illinois

End Time: 2024-08-11T07:16:37.000Z

Shipping Cost: 0 USD