Description: Arizona Custom GripsColt SAA3rd Generation~ Exclusive ~ MAGNA-TUSK™black ivory gripsMilled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~two-PIECE (with SCREWHOLE) STYLETHIS AUCTION IS FOR OUR TWO-PIECE (SCREWHOLE) STYLE GRIPS. SEE BELOW.********ONE-PIECE VS. TWO-PIECE STYLE GRIPS:Note: Two-Piece style grips incorporate a visible screw and screwhole, allowing easy and quick removal for cleaning or maintenance of your revolver. One-Piece style grips do not use a screw but instead use an internal spacer. We sell both types. Both styles are traditional and historical designs and both were originally used on early Colts, so it is a matter of personal preference. Both styles of our grips will interchange and work on either style of grip frame, no matter how your revolver is currently set up. See below.One-Piece style grips (i.e., grips which do not have a visible screwhole in the grips) incorporate a user installed spacer (included with the grips) between the grip panels, as seen on many of the early Colts. The spacer supplied with your grips is sent unmounted to ensure optimum fit with your revolver, with simple, quick installation which takes about one minute or so per panel. Fully illustrated instructions are included. This results in a rock-tight fit, without the need of a screw. Preferred by many collectors for their clean lines and traditional look. One-Piece style grips are removed by removing the three backstrap screws, and pulling the grip and backstrap backwards. Reinstallation is in reverse order. Alternatively, our Two-Piece style grips (i.e., grips with a visible screw and screwhole) offer the superior convenience of quick grip removal. Our grips include a free Conversion Kit, allowing their use on revolvers that are currently set up for One-Piece style grips that do not have a grip pin. The Conversion Kit replaces the need for a grip pin and is actually a stronger design, and allows the grips to lock up tight on the frame, allowing no movement. This requires no modification to your revolver and gives you the advantage of the ease of maintenance of Two-Piece grips, while preserving the integrity of your revolver in original factory condition. Two-Piece style grips were also used on many of the early Colts, and are a traditional and iconic historical design, offering a distinctive look and convenience preferred by many collectors.Fully illustrated, detailed instructions are included with each set of grips. 06302300~~~~~WHAT THESE WILL FIT (Please read this through in its entirety): Colt SAA 3rd Gen.Brand New, unused grips for the 3rd Generation Colt Single Action Army revolvers. Please note that these grips will NOT properly fit the 1st or 2nd Generation Colt SAA models. Also, these will NOT fit any revolvers of any different maker, including the Uberti, Pietta, or any other Italian or non-Italian clones. If you have one of these, please see our store categories for the proper grips, or drop us an email and we will be happy to help. 10292000 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory Grips: Magna-Tusk™ Ivory grips, an exclusive of Arizona Custom Grips, are manufactured out of our super high-grade, ultra-high density Ivory material developed exclusively for our premium grip production. Vastly superior to standard bonded ivory found on factory and other aftermarket Ivory grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative ivory material available today, while still retaining the pristine look of real ivory. It is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural and synthetic compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, imitation stag, etc., found on many historic grips. Grip screw included with all grips. The photo used is a stock photo (a sample pair) as we carry an assortment of this style grip. Yours will appear similar to these. Customer satisfaction is important to us -- full money back, less shipping, if not completely satisfied!!
Price: 89.95 USD
Location: Mesa, Arizona
End Time: 2024-02-19T01:10:34.000Z
Shipping Cost: 5.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Arizona Custom Grips
Specific Part: Grips
Color: Black Magna-Tusk Ivory
MPN: Does Not Apply
For Gun Type: COLT SAA 3rd GENERATION SINGLE ACTION ARMY
Country/Region of Manufacture: United States
Material/Finish: Magna-Tusk Black Ivory
Available Variations
Color: Silver Liberty Eagle
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Gold Liberty Eagle
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Antique Nickel Steer Skull
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Red Steer Skull
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: No Medallion
Price: 89.95 USD
Available Quantity: 100
Quantity Sold: 0
Color: Silver Colt
Price: 109.95 USD
Available Quantity: 100
Quantity Sold: 2
Color: Gold Colt
Price: 109.95 USD
Available Quantity: 100
Quantity Sold: 0
