Closed Loop Stepper Servo Motor Hybrid Driver Kit Nema44 16Nm 20Nm 180-250AC 3PH

Description: Closed Loop Stepper Servo Motor Hybrid Driver Kit Nema44 16Nm 20Nm 180-250AC Driver Specification Input voltage 180-250VAC Name 3ph Hybrid servo driver Output Current 4.0A Model 3HSS2208H-110 Logic input current 7-20mA（10mA Typical） Communication rate 57.6kbps AximumPulsingFrequency 200K Protect 1. The peak overcurrent protection is 12A ±10% 2. The overvoltage action value is 400VDC 3. The error alarm threshold can be adjusted through the front panel of the driver Size 140x70x56mm Weight 1.5kg Work environment 1. Avoid dust, oil, and corrosive gases 2. The maximum operating temperature is 70° C 3. Storage temperature -20 ° C to +65 ° C 4. Cooling method - Natural cooling Note：Installation mode: Install the heat sink on the vertical side so that there is strong air convection on the surface of the heat sink. If necessary, install a fan near the driver for forced heat dissipation. Driver Wiring Diagram NEMA 44 Motor Specification Model:110HB350-B16N Flange:110mm Holding Torque:16N·m(2266oz-in) Rotate speed:0-1000rpm Motor length:190mm Shaft diameter:19mm(keyway=6mm) Shaft length:38mm Shaft type:single Phases:3PH Step angle:1.2° Rated Current:5A wiring method:three phase three wire system Model:110HB350-B20N Flange:110mm Holding Torque:20N·m(2832oz-in) Rotate speed:0-1000rpm Motor length:190mm Shaft diameter:19mm(keyway=6mm) Shaft length:38mm Shaft type:single Phases:3PH Step angle:1.2° Rated Current:6.8A wiring method:three phase three wire system On Mar 29, 2023 at 01:08:21 PDT, seller added the following information:

Price: 423.69 USD

Location: Shenzhen

End Time: 2023-11-29T09:03:31.000Z

Shipping Cost: 0 USD