CLIFFORD MATRIX KEYLESS ENTRY car starter REMOTE CZ57RRKO CONTROL key FOB

Description: This item is pre-owned – it will work like new once programmed to your vehicleRemote has faded button graphics and the original keyring loop has broken off so a hole was drilled to insert a key ring that will securely hold your key ring One (1) Aftermarket remote keyless entry fob alarm Transmitter control clicker keyfob controller replacement FUNCTIONS AT 100% TESTED & GUARANTEED Clifford FCC ID: CZ57RRKO (Alternate Spelling: CZ57RRKO) Part #: 904090, 904095, & 904100 Frequency: 433 434 MHz 4 buttons Compatible with the following systems Concept 100 200 400 450 600 Ace 4000 7500 Intelliguard 6000 7000 8000 9000 Matrix 2 2.2 X 3 10 10.5X RS RS1.1 RSX1.2 RS2 RS2.1 RSX3.2 Avantguard 4 Bullet 4 Cyber 4 Clifford G4 Programming Instructions: 1 Write down the column (across) number and row (down) number of the feature(s) you wish to program 2. Turn the ignition to the “ON” position or start the engine 3. Enter the factory preset valet/programming code of “2” by pressing the Plain View 2 Switch’s Θbutton twice, then press the unmarked button 4. After entering the code, press and hold the Θ for about 3 seconds until you hear one siren chirp and the LED turns on to acknowledge program mode entr y. The Concept 100 is now in the “Feature Select” position for User-Pr ogrammable Features. 5. Select the feature column: Press the unmarked button the same number of times as the column number. Pause. You will then hear the same number of chirps as the column number you have selected, audibly confirming your selection 6. Within five seconds, select the feature row: Press and release the Θ button the same number of times as the feature’s row number. You’ll hear a chirp each time you press the button to help you count. 7. If there is a NOTE for the selected feature, perform the actions noted 8. Pause. You will hear either one or two chirps: two chirps = ON , one chirp = OFF. 9.You can select another feature, or you can exit program mode: a. To select another feature in that same column, repeat step 6 within the next five seconds (after five seconds, three chirps indicate that the Concept 100 is now back in the“ Feature Select” position). b. To select a different feature column, repeat step 5. c. To exit program mode, turn the ignition off (you’ll hear three chirps and the LED will turn off to indicate exit of program mode), or wait 60 seconds and the Concept 100 will automatically exit program mode. It may sound a little complicated, but it really isn’t. Briefly, here is all you do: choose the feature you want to change, enter program mode, select that feature’s column and row, wait for the on/off chirp confirmation, then turn off the ignition. STOP! Before You Buy Please Read… Program Remote To Your Vehicle If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first. This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system: 1. PLEASE REFER TO YOUR ORIGINAL OWNER’S GUIDE FOR YOUR AFTERMARKET INSTALLED KEYLESS ENTRY SYSTEM OR 2. CONTACT A LOCAL CAR/AUDIO SHOP 3. CONTACT A LOCKSMITH 4. CONDUCT A GOOGLE SEARCH 5. CONTACT MANUFACTURER

Price: 25.48 USD

Location: Wellsboro, Pennsylvania

End Time: 2025-01-03T16:32:06.000Z

Shipping Cost: 6.96 USD