CCS -Pro Series Shear Nozzle 4412 (750 CFM) 2300 HOLLEY TWO BARREL CIRCLE TRACK

Description: Carburetor Collectibles Specialty Brand: Holley Product Line: CCS NEW Part Type: Carburetors Part Number: Holley-4412 HP Number of Barrels: 2 Carburetor Flange: 2300 Flange Choke: None Fuel: Gasoline Secondary Type: Mechanical New or Remanufactured: New Fuel Inlet: Single Feed CFM: 750 CT-HP Pro Series Carburetor Finish: Dichromate Kick down : No Booster Type: Proprietary Shear Nozzle The absolute for classes limited to a 2 barrel with no limitations. Excellent low end response and unmatched top-end power makes this the best Oval Track 2 barrel. Works on modified 6 cylinders and all cubic inch V-8’s. Carburetor, NEW, Holley 4412 CT 750 CFM Pro Series Shear Nozzle 2-Barrel, Square Bore, Single Feed and Metering Plate mounting surface has been milled for a better gasket sealing. This Carburetor Makes Serious HP and Torque. CCS was full of activity in the Off Season. With our most up-to-date D1400 Carb Master Flow Bench and Tommy’s Dyno Shop the Research & Development is in high gear. Check out new line up in Oval Track 2 barrel and Dominator series. All CCS Racing Series Carburetors are Dry Air Flow tested at 20.4” 4 bbl and 40.8” 2 bbl on a Jamison D1400 Carb Master Flow bench using the latest Audie Tech software with a 2” open hole spacer. In order to confirm the correct fuel curve and air fuel ratio, all CCS Pro Series Carburetors research and development is run on a Super Flow 901 Dyno. Features Removeable air bleeds are available on all stages. Metering block CCS design is selected based on your engine combination Matched Shear Nozzle boosters are installed, then aligned and centered in the venturi for best flow and signal Floats are modified based on applications, Nascar Circle Track single taper Carburetor is hand assembled using only the highest quality components, including MP 15 Racing reusable gaskets for ease of tuning and service Booster design is chosen based on your engine specifications, then balanced and modified for increased signal strength and atomization characteristics, providing crisper throttle response and driveability, as well as increased HP and TQ thru-out the rpm All body surfaces machined for maximum gasket sealing, ensuring consistency and reliability All components are then vibratory tumble polished and dichromate coated for a brilliant high gloss gold finish Metering block are Proprietary CCS Billet hand selected and all circuits and passages are checked for casting flaws and obstructions, as well as proper sizing Resulting Airflow = 750 CFM This carburetor is intended for classes which have no restrictions on carburetor modifications, and it will "NOT" pass any type of gauge test. Will pass the butterfly and venturi 1.75 max diameters Go/No-Go Gauge Test Upper venturi enlarged to maximum possible size to create dramatic increase in peak airflow capacity Removable air bleeds installed in main body Booster venturi modified for increased airflow as well as better signal strength and atomization Balance all metering passages, then resize and modify for optimum fuel curve, including: CCS Billet 4 Hole Emulsion, High Speed Air Bleed, Idle, Idle Air Bleed, Main Well, Main Well Exit, Power Valve, Transition Fully CNC machined from venturii throat to throttle bore for predictable & repeatable performance If your looking for a professionally prepared "off the shelf" performance carburetor at an affordable price. We’ve got your carb! The "PSB-BSeries" was designed with the Pro-Street and Bracket Racer in mind featuring clean idle, crisp throttle response, and killer acceleration. These carburetors are equally at home on the street or race track.CCS Performance Carburetors now offers the custom hand built Billet 650-850 PSB (Pro Street Billet) series carburetors. Run the carburetors that win every week and sense the modification of a true 100% hand built performance carburetor. All CCS Carburetors can have the Power Valve-Jets-Needle& Seat-Squirters changed to meet your Specs for no extra charge. Just send an email for your changes at the time of purchase. Please allow two extra days for shipping on any changes. Compatible with Today’s Complex FuelsCCS Kits are supplied with the highest quality components that meet or exceed original equipment specifications and all CCS kits are compatible with today’s complex fuel All returns must be pre-approved before returning. Absolutely No Refund on installed items or returned items in non-sellable condition. Buyer to pay returned shipping Cost. This 30 Day Carburetor warranty does not apply to products that have been modified or altered, subjected to misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, faulty repair or used in other than those applications recommended in the current CCS Performance website. Purchaser's remedies under this Limited Warranty are strictly limited to the repair or replacement of the defective product or parts. CCS shall not be responsible for any actual or alleged labor, transportation, shipping or other incidental charges or actual or alleged consequential or other damages incurred due to an alleged defect under this warranty. In no event shall CCS maximum liability under this Limited Warranty exceed the original cost of the alleged defective product to the consumer.All Electrical items Carburetor Kits and Fuel Injection Kits will be shipped in sealed clear Package if the package is un-wrapped the item is nonreturnable. Carburetor Collectible Specialty Thanks You for Your Support!Please before leaving FeedbackIf you receive an order that does not meet your Expectations, please permit us the opportunity to fix the problem before leaving negative feedback or rating us. Keep in mind our prices are controlled by eBay rating process. We strive for perfection, and welcome the opportunity to correct any issues with your order. Your satisfaction is our #1 importance.Shipping TimeMost items will be shipped within 1 business day from the time your payment clears. A delay in payment equals a delay in shipping. Our Pro-Series Carburetors with customer specs will be shipped within five days.CCS Performance Carburetor is a complete service seller not an Empty Wagon Seller (drop shipper). Every item you see on our websites will be in stock and complete to ship within 24 hours of payment. In order to meet the price Competitive Ecommerce market we purchase direct from the manufacturers in bulk quantities and package some items in houseContact us.Email is the quickest way to contact us. You will receive a response within 48 hours. Please limit your questions to the products we sell.If you have purchased one of our Performance Series Carburetors a Tech Support phone number will be provided in the technical information supplied with each carburetor purchase.Sales TaxAll Orders shipped to a Virginia address must pay 7% Sales Tax Let CCS make your EBay experience a Great One!CCS Performance Carburetor (CCS) ships carburetors only after they have been thoroughly run-tested and adjusted on a typical engine. Engine testing all carburetors prior to shipment ensures that when a new CCS carburetor is bolted on an engine, it will start, idle and perform up to the customer’s expectations.However, sometimes a little more fine-tuning is necessary because the customer has a fairly radical street setup with a big cam with lower than typical intake vacuum, or the carburetor is not properly sized for the engine it is being used on.There are many misconceptions about how to go about these adjustments, and of course there is no shortage of free advice. Please read the proven step-by-step carb tuning tips to get the most out of your carburetor’s performance.Following these step-by-step tuning tips are essential to make sure that your engine runs at peak performance. Along with these tuning tips, a check of your ignition system, as well as, the mechanical and vacuum advance curves in your distributor is suggested to eliminate any potential timing and ignition problems. Also remember fuel pressure is always a mine consideration for all applications.Before starting your engine with your new carburetor, tighten all bolts and screws. There can be substantial gasket shrinkage after the carburetor has been fired up, so this is very essential! Set all float levels at 25% up from the bottom of the glass. Main jetting varies significantly from application to application, so only make light passes up until you verify the jetting is in the parameters of the engine requirement. Most gasoline carburetors require a total minimum of 7.25 pressure of fuel under load at wide open throttle to perform appropriately. Be sure the boosters DO NOT drip fuel at an idle. Lower float level or the fuel pressure is this occurs or adjusts the throttle plates setting.We measure success by a 10th of a SecondThe 30 Day Carburetor warranty does not apply to products that have been modified or altered, subjected to misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, faulty repair or used in other than those applications recommended in the current CCS Performance website. Purchaser's remedies under this Limited Warranty are strictly limited to the repair or replacement of the defective product or parts. CCS shall not be responsible for any actual or alleged labor, transportation, shipping or other incidental charges or actual or alleged consequential or other damages incurred due to an alleged defect under this warranty. In no event shall CCS maximum liability under this Limited Warranty exceed the original cost of the alleged defective product to the consumer. Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

Price: 1195 USD

Location: Virginia Beach, Virginia

End Time: 2023-12-04T14:23:40.000Z

Shipping Cost: N/A USD