Car Non-Dismantle Fuel Injector Cleaner Fuel/Intake System TWC Converter Cleaner

Description: Product description: 1.The injector clean kits include many different kinds of adapter, cover almost all the EU,Asia,USA cars and lighttrucks. Non-Dismantle injector Throttle and fuel system. 2.The system is not only characteristic of high and low pressure cleaning function. At the same time put the function of the whole combustion chamber fuel system of several major functions in one product, such as cleaning throttle valve and the fuel nozzle. Car Non-Dismantle Fuel Injector Cleaner Fuel/Intake System TWC Converter Cleaner Non-Dismantle Fuel Injector Cleaner 1000ml Bottle: Made of stainless steel material for anti-scratch and corrosion resistance and safe and reliable. Bottom Oil Outlet Design: No residue in cleaning, no corrosion of cleaning equipment. One-Way Valve: Good air tightness. Rotary Valve: Adjust the pressure to make the detergent spray better. Customized Pressure Gauge: Display air pressure and oil pressure. Anti-Shock Rubber Protective Cover: Prevent the instrument from being damaged by dropping. Hook Design: Easy to hang and move cleaning tools. Heavy Duty Plastic Carrying Case: Better protect wash kit from shocks for easy storage, quick organization and transport. Major Cleaning Used in conjunction with fast and efficient fuel system cleaner (not included), it can completely remove carbon deposits on intake valves, fuel injectors, piston rings and combustion chambers in about 20 minutes, and can quickly and effectively clean the entire fuel system, including TWC , intake manifold, throttle valve and exhaust pipe, etc. Fuel System Cleaning Improve fuel supply, full combustion and reduce exhaust emissions. Intake System Cleaning Reduce carbon deposits, increase the oil-gas mixture ratio, and smooth idle speed. TWC Converter Cleaning Solve the problems of weak acceleration and difficulty in increasing engine rpm and vehicle speed. COMPLETE ADAPTERS FOR WIDE COMPATIBILITY The adapters in this fuel injector cleaner kit are the most complete on the market. Its main parts and joints are made of brass, and the connecting pipes and seals are made of selected perfluororubber materials, which have strong toughness and corrosion resistance, are more stable, and do not leak. The fuel injector cleaning kit is compatible with various car series, and can clean all kinds of carburetors, electronic/mechanical fuel injection vehicles and light trucks in Europe, America, Japan, Korea and China. Operation Instruction How to clean the throttle body? Start the engine, put the engine at idle speed until the engine is working stably, and then turn off the engine. Open the oil filler cap of the cleaning equipment, pour a bottle of cleaning agent into the cleaning equipment bottle, tighten the cap, hang the cleaning equipment on the engine cover, and close the ball valve switch on the oil outlet pipe. Disconnect the intake pipe from the closest valve, start the engine, and put it in a high idle state, usually the engine runs at 1500 rpm. Install the atomizing nozzle on the oil outlet pipe of the cleaning equipment, put it on the air inlet pipe, and slowly open the ball valve on the oil outlet pipe of the cleaning equipment until the liquid sprays out from the nozzle. Keep the speed at 1500 rpm to clean the carbon deposits in the engine intake system. After cleaning, turn off the engine and reconnect the intake pipe. How to clean the fuel system? For hose line connection methods with and without return hose, Please refer to the manual in the "Product guides and documents" section of the product detail page. Add the cleaning agent into the stainless steel bottle, connect the compressed air to the air inlet of the washer and adjust the pressure to 40-50PSI, check whether there is oil leakage at the connection, start the engine to start cleaning; Drain out the pressure in the bottle after flushing, and then disconnect the cleaning tool. Restore all of the pipes of the fuel system and check there have no leaking. Note: The carburetor cleaning method is the same as the EFI cleaning method, the pressure is 1-5PSI, too high pressure will damage the carburetor needle valve and cause too much oil into the combustion chamber. How to clean the catalytic converter? Use a throttling vacuum adsorption device for cleaning, and one end of the device is sheathed in the engine intake manifold (note: do not insert into the brake vacuum pipe). After preheating the car for 5 minutes, run it at idle speed, slowly open the ball valve, let the detergent enter the manifold very slowly, after 20-40 minutes after cleaning, increase the throttle to 3000-4500RPM, run at air speed for a few minutes, and the dirt will be dissolved Or burn or discharge from the exhaust pipe after strong oxidation. Preheat the car, connect the suspension tube to the three-way catalytic cleaning agent; insert the equipment needle into the PCV vacuum tube; start the engine, open the equipment control valve, and make the cleaning fluid drop in the window. Idle the engine until the chemical solution is washed; turn off the engine after cleaning, and reconnect the pipeline. Run the engine at an idle speed of 2000 for 5-10 minutes, and drain the residual liquid. Package List: 1x Fuel Injector Cleaner1x Adapter Kits1x Suitcase

Price: 129.99 USD

Location: shenzhen

End Time: 2023-11-23T07:44:35.000Z

Shipping Cost: 0 USD