Brushed ESC 24V 48V 60A High Voltage Brush Motor Speed Controller RC Model Car

Description: indexBrushed ESC 24V 48V 60A High Voltage Brush Motor Speed Controller for RC Model Car-- Description --- This ESC is widely apply to RC tank, RC car, RC crawler, RC truck, RC Boat.- works in forward/backward.- Support wide voltage and high voltage input, it is up to 60V.- Automatically to find the neutral point.Please note:UBEC is a switching-Mode regulators, Please don`t use two ESC in parallel to power the receiver, otherwise they will be burned.the correct method is to disconnect the positive line of one ESC.and if the receiver is powered by other module,please disconnect positive line of this ESC.How to brake:The throttle stick move back over the neutral point a little bit, the motor braked to a stop. When the motor is forward rotation, pull back the throttle, motor reverses immediately.Throttle Range Setting(Throttle Range Calibration):Move the throttle stick to the full throttle position,and then connect the battery pack to the ESC, after 2 seconds, the indicator light flash twice, that means the full throttle position has been confirmed.After the full throttle position was confirmed, you must release the throttle stick to the neutral position immediately, the indicator light flash three times,that means the neutral position has been confirmed.How to use:1, Connect with receiver,motor,battery correctly.2, Turn on the power of ECS, The LED flashes once.3, Push the throttle stick to the neutral point,Turn on the transmitter, and adjust the throttle stick/trim until the LED flashes once.that means the neutral position has been confirmed.Motor Limits:Power≤350W and Revolutions per minute≤4000rpm, when use 24V batteries.Power≤500W and Revolutions per minute≤4000rpm, when use 36V batteries.Power≤650W and Revolutions per minute≤4000rpm, when use 48V batteries.-- Specification & Features --- Working Voltage: 10V-60V(lithium battery 3s-13s), support secondary battery.- Continuous Current: forward 60A, Backward 60A- UBEC: 5V/0.5A- Weight: 110g- Signal Connector: wire length about 20cm- Dimensions: 8.3cm x 5.0cm x 2.0cm- Connectors: XT60 optional-- Item Contains --1 piece of 24V 36V 48V 60A Brushed Motor Speed Controller ESC for RC Car Tank Truck Boat CrawlerEasy to use, without manual. ▶PaymentWe only accept PayPal. Payment must be made within 7 calendar days of the auction end time. ▶ShippingUS usually takes about 7-14 days.Other countries usually takes about 20-35 business days.If you want the items are shipped by Expedited Shipping (such as DHL,UPS,EMS,Fedex),please choose the Expedited Shipping or contact me.It maybe delay for hot sales season,Strike,bad weather,and so on. It will take more time to ship to some countries. Thank you for understanding! ▶Return PoliciesYou get 3 month guarantee, and 14 days return policy after get the item, Always buy from me with confidence!If you receive a unsatisfactory item or dont arrive in time. please send us a message via ebay. We promise to give you a satisfactory solution in one working day.Please contact us before you return it (Please do not open return case,we will try our best to solve your problems,thanks) ▶CONTACT USBecause of the time difference, our work time is according to Beijing time (GMT +8:00).9:00am to 5:00pm Monday to FridayI am ready and eager to answer your question at first time,We apologize for the late reply during the holidays.

Price: 44.69 USD

Location: 深圳

End Time: 2024-11-19T19:16:02.000Z

Shipping Cost: 3.5 USD