Description: Untitled DocumentView StoreFeedbackBrian Tooley (BTR) .660" Dual Platinum Valve Spring Kit & 7.400" Pushrods (Set of 16) This is the perfect kit to complete your cam swap, if you have already picked out your camshaft. Kits ship standard with the following: BTR .660" Lift Dual Platinum Valve Springs (set of 16)Chromoly Steel RetainersLocators for Stock Guides (.505" ID/.060" Thick) - If another locator is desired, please message us.Black Valve SealsPLUS, 7.400" Chromoly One Piece Pushrods, 5/16" diameter, and .080" wall (set of 16) Spring specs are 155 lbs @ 1.780", 380 lbs @ 1.180", 400 lbs @ 1.130, coil bind @ 1.070" This is a drop in spring kit for all 15 degree LS heads including LS1 LS2 LS3 LS4 LS6 L76 L92 L99 LQ4 LQ9 L33 LSA, etc, this kit will also fit LS7 heads with approximately .045" of spring shim (part numbers SS015 and SS030). These one piece precision formed pushrods are constructed from SAE 4130 chromoly tubing, centerless ground to exacting tolerances, and case hardened to RC60. This kit will not fit LS9 engines, please use part number SK006 for LS9 heads. NOTE: Other pushrod lengths are available from 7.200" to 7.900", please contact us if you need a different size than listed.NOTE: 7.400" is the standard LS length, but any of the following can affect pushrod length required and each application may be different: Cylinder Head Deck ThicknessBlock Deck HeightValve Stem LengthRocker Arm BrandCam Shaft Base Circle DiameterLifter Design, Etc. We highly recommend that you measure you particular application to determine correct pushrod length due to the number of variables involved. We cannot recommend a length based strictly on combination and the only way to determine required length is to measure appropriately. RETURNSPlease read the listing entirely as returns are typically not accepted and may be subject to a 20% restocking fee. If you have any questions or are unsure of something, please ask before purchasing. Cancellations will not be made for purchasing errors. It is the buyer's responsibility to make sure that they enter the correct shipping information at the time of purchase. Once an item has shipped, we can not make edits to the shipment, including the shipping address provided.SHIPPINGMost items ship in 1-2 business days. Shipping is available for customers outside of the Contiguous United States, please contact us for the best and most accurate rate quote.PAYMENTS LEGALAll images and text contained within this listing are protected by intellectual property copyright law and are intended for the sole use of Glenn's Auto Performance. Our Terms of Service Agreement and Privacy Policy are available for your review by visiting our website.
Price: 349.99 USD
Location: Bardstown, Kentucky
End Time: 2023-11-15T17:40:34.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Interchange Part Number: Steel Retainers
California Prop 65 Warning: WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects or, other reproductive harm. For more information, visit www.P65Warnings.ca.gov WARNING: It is illegal to install any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system unless the part is exempted or has an Executive Order issued by the California Air Resources Board (also commonly referred to as the "EO" number). Confirmation: By completing your purchase, you acknowledge that any NON CARB-approved products will be installed for off-road competition use only. Furthermore, by acknowledging you understand the above notice regarding CARB-approved products, and accept responsibility for compliance.
Manufacturer Part Number: SK001/7.400" Pushrod Set
Brand: Brian Tooley Racing
Manufacturer Warranty: No Warranty
