Description: Blue Heron Febco 1/2" to 3/4" Poppet & Bonnet Assembly Replacement Kit for Sprinkler PVB. 1 Year Warranty Manufactured in Denver, CO using a high grade plastic. Kit replaces Febco 905-211 Bonnet Repair Kit for #765 1/2" & 3/4" Vacuum Breakers & Backflow Preventers • Fits Models 765-050 & 765-075 Guaranteed Fit and Easy DIY USA Manufactured. Simple replacement. Why buy from us?Denver, Colorado Manufacturer.USA Made. 📦 Fast Shipping 5 ⭐ Service 💯% Valid Tracking and Delivery Product Details Fits all 1/2" and 3/4" FEBCO PVB Backflow Preventers Durable construction Sleek design 3 year warranty How to Replace the Bonnet and Poppet (you should always change both): Turn off the water going into the PVB this is done by turning the ball valve handle at the base of the PVB. The handle should have been vertical before you started; turn it to the horizontal position. Turn off the water going out of the PVB this is done by turning the ball valve handle on the outlet side of the PVB. The handle should have been horizontal before you started; turn it to the vertical position. Open the two test cocks on the side of the PVB to relieve any water pressure inside the PVB. This is done by removing any rubber caps or thread protectors from the test cock, then turning the screw on the side of the test cock 90°, so the screw head is parallel with the test cock. Remove nut, bell cap, O-rings, and broken pieces of old bonnet and poppet. Replace with Yellow Jacket bonnet and poppet repair parts, and place bell cap and nut back on assembly. Be sure not to over-tighten the nut: hand-tighten the nut, then tighten with a wrench just until the bell cap can't wobble. The bell cap should still be able to spin without difficulty. Turn on the water on the inlet side of the PVB slowly. Turning it on too quickly will break your new bonnet and poppet. Turn the ball valve handle to a 45° angle, or halfway to fully open. Water will begin to spill out the test cocks. Close the test cocks, then open the inlet ball valve the rest of the way, being sure to open it slowly. After closing the test cocks, water will begin to come out of the bell cap. This should stop after you have turned the ball valve to the fully open position. Open the ball valve on the outlet side of the PVB.
Price: 27.27 USD
Location: Brighton, Colorado
End Time: 2024-08-14T00:05:25.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Blue Heron
Type: Irrigation Kit
Item Height: 2 in
Color: Blue
Model: Febco 765
Features: Quick & Easy Connection Technology
MPN: 0001
Set Includes: Complete Bonnet Repair Kit
Item Length: 2 in
Item Width: 34 in
Suitable For: Febco, PVB, Backflow, 1/2" to 3/4" Unit
Installation Area: Garden (above ground)
