(BIG SIZE) 3D panel self-adhesive brick Silver 700x770x3mm

Description: Height - 770 mmThickness - 3 mmLength - 700 mmMaterial - Foamed polypropyleneArea covered by the panel - 0.539 square meterType of use - For interior workMaterial delivery form - SheetCountry of origin - ChinaCoating - VarnishManufacturer - Sticker Wall Item can be shipped like gift for avoid addtional customs taxes. Self-adhesive 3D panels are a decorative wall covering made of lightweight and durable material – porous polypropylene (PPP). The main feature is a relief pattern in the form of bricks in a wide variety of colors and the presence of an adhesive layer, which allows you to install the panels without the need for additional materials. The panels consist of the following layers: PVC film (on the front side) is a polymer consisting of long chains of vinyl chloride molecules, which contain chlorine atoms, this makes the material resistant to chemicals, and due to the amorphous crystal lattice, PVC is very elastic and lightweight.Decorative layer: high quality color printing that retains its saturation for a long time.The core layer of porous polypropylene is a thermoplastic polymer whose structure includes repeating propylene molecular units. It has a cellular structure, due to which it has good thermal insulation and low density, and therefore low weight. Porous polypropylene is also moisture resistant and chemically inert.Adhesive layer: non-toxic base with a high level of adhesion.Protective paper: protects the adhesive layer from drying out and contamination, and can be easily removed during installation.The main advantages of 3D panels made of PPP: Lightweight: due to its structure, the material is lightweight, making it easier to transport (while making it more economical) and installation.Insulating properties: the porous nature of the material, in addition to its low weight, gives it good heat and sound insulation properties.Easy installation: the presence of an adhesive layer allows you to install the panels without the need for additional materials.Flexibility and strength: the flexibility of the material allows it to adapt to various, even not the most even, surfaces, while maintaining strength.Resistance to water and chemicals: porous polypropylene has good resistance to moisture, which makes it possible to use it in rooms with high humidity, and thanks to the protective PVC film, the panel can be washed with household detergents (without using a highly abrasive brush).Environmental safety: polypropylene is odorless, and is also a safe and sustainable material from an environmental point of view, and can be recycled.The panels are suitable for interior finishing work: decorating and thermal insulation of walls in all types of residential and commercial premises, as well as for decorating and restoring furniture, doors and other, even not entirely smooth, surfaces. Calculation of the required amount of material: Measure the length and width of the surface to be pasted.Multiply the length by the width of each surface in meters and add up the results to get the area. For example, after measurements you received: Wall length 3.7 m. Wall width 2.7 m. 3.7 * 2.7 = 9.99 m²The resulting area must be divided by the area of one panel (700 * 770 = 0.539 m²) and rounded up: 9.99/0.539 = 18.53 rounded to 19. During the installation process, waste associated with cutting panels may arise, so it is recommended to add 1-2 spares included.Installation: You need to make sure that the surface on which you are going to install the panels is clean, dry and level. Any dust, dirt or oil from the surface must be removed and the surface leveled if necessary. The panels and surface must be at room temperature to ensure good adhesion of the adhesive base.Peel off the backing paper from the back of the self-adhesive panel to expose the adhesive surface.You must begin installation from one corner and gently press the panel onto the surface, ensuring that the panel is installed smoothly and neatly, avoiding the formation of bubbles or wrinkles.Panels can be cut using a knife or scissors to adjust the panel to size, especially around the edges and corners of the surface.The panels must be pressed firmly against the surface to ensure good adhesion between the panel and the surface.

Price: 17 USD

Location: Prylutske

End Time: 2025-01-19T10:17:49.000Z

Shipping Cost: 0 USD