Cardinal

Automatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch Sensor

Description: Package Include: 1 X CNC Z Axis Engraving Machine Tool Specifications: Model : Automatic Tool Setting Color : Black + Silver Material: Grinding 4s+ Superhard Alloy Output Mode: Normally Closed Normally Closed Specification Technical Parameters Output Mode: Bnc (Normally Closed) Pre-trip: Almost Zero Stroke: 5mm Repeatability: 0.001mm (Condition: Operating Speed 50-200mm / Min) Contact Life: 3 Million Times Protection Structure: IP67 Contact Force: 1.5N Contact Material: Super Hard Alloy Housing Material: Grinding 4S Contact Rating: DC24V 20mA (Max) (Recommended Value 10ma) Resistance Load Cable: 3m Oil Resistant °4 Core ∞5 Tensile Strength 307n Minimum Bending Radius R7 Protection Tube: Minimum Bending Radius 1 M R25 Alarm Signal When the Trip Is Exceeded Automatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch SensorCNC Automatic Tool Setter Gauge Z Axis Tool Touch Sensor Setting Presetter BNCPackage Include: 1 X CNC Z Axis Engraving Machine Tool Specifications:Model : Automatic Tool SettingColor : Black + SilverMaterial: Grinding 4s+ Superhard AlloyOutput Mode: Normally Closed Normally Closed Specification Technical ParametersOutput Mode: Bnc (Normally Closed)Pre-trip: Almost ZeroStroke: 5mmRepeatability: 0.001mm (Condition: Operating Speed 50-200mm / Min)Contact Life: 3 Million TimesProtection Structure: IP67Contact Force: 1.5NContact Material: Super Hard AlloyHousing Material: Grinding 4SContact Rating: DC24V 20mA (Max) (Recommended Value 10ma) Resistance LoadCable: 3m Oil Resistant °4 Core ∞5 Tensile Strength 307n Minimum Bending Radius R7Protection Tube: Minimum Bending Radius 1 M R25Alarm Signal When the Trip Is ExceededOutput Mode: Bnc (Normally Closed) (2.5mm from the Measurement Signal)Contact Rating: DC24V 100mA (Resistive Load) Installation Instructions1, the Props and the Tool Setting Device Must Be Perpendicular to the Contact Surface, and Vertically Contact the Contact Surface, Please Install As Much As Possible on the Workbench Where the Iron Filing Area Is Small.2, Please Be Sure to Use the Voltage Within the Rated Power Supply Range, Please Control the DC10-30V, the Current Is Below 20mA, the Ambient Temperature Range Is -25° C-70° C. 3. Please Control the Cutter Tool Diameter Below 20mm and the Cutter Speed to Be Below 50-200mm/Min. the Tool Center Should Fall to the Center of the Tool FaceWhen Using the Blowing Function, the Air Tube Has a Diameter of 6 Mm and an Inner Diameter of 45 Mm. Take Care to Remove the Iron Filings and Cutting Oil Attached to the Contact Surface. Terms and Conditions:1, the Contact Can Not Exceed the Stroke of the Tool, Otherwise the Tool and the Props Will Be Damaged. (Formed As 5.0mm)2. Please Do Not Release It Immediately When Touching the Tool Setting Tool by Hand to Avoid Damaging the Internal Structure of the Tool Setting Tool.3. When the Tool and the Tool Setting Tool Are in Contact with the Tool Setting, Please Do Not Release It Immediately. the Tool Must Be Lifted off the Contact Surface Vertically. It Cannot Be Moved Laterally. If It Moves Laterally, It Will Damage the Tool Setting Tool.4. When Using the Blowing Function, the Air Tube Has a Diameter of 6 Mm and an Inner Diameter of 4-5 Mm. Take Care to Remove the Iron Filings and Cutting Oil Attached to the Contact Surface.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.shipping noticeCan not ship to Puerto Rico,Alaska/HawaiiBrandUnbrandedMPNDoes Not ApplyModelAutomatic tool settingColorBlack + SilverMaterialGrinding 4S+ superhard alloyOutput modenormally closedStroke5mmRepeatability0.001mmContact life3 million timesProtection structureIP67Contact force1.5NContact materialsuper hard alloyContact ratingDC24V 100mA (resistive load)On Nov 3, 2023 at 01:01:11 PDT, seller added the following information:

Price: 34.2 USD

Location: Chino, California

End Time: 2024-02-03T08:25:01.000Z

Shipping Cost: 0 USD

Product Images

Automatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch SensorAutomatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch SensorAutomatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch SensorAutomatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch SensorAutomatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch SensorAutomatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch SensorAutomatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch SensorAutomatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch SensorAutomatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch SensorAutomatic CNC Tool Setter Presetter Setting Gauge Z axis Probe Tool Touch Sensor

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Feature 1: Compact Design,Unique Appearance

shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii

Brand: Unbranded

MPN: Does Not Apply

Model: Automatic tool setting

Color: Black + Silver

Material: Grinding 4S+ superhard alloy

Output mode: normally closed

Stroke: 5mm

Repeatability: 0.001mm

Contact life: 3 million times

Protection structure: IP67

Contact force: 1.5N

Contact material: super hard alloy

Contact rating: DC24V 100mA (resistive load)

Recommended

Shiny Glossy Pantyhose Tights Stockings Nylons
Shiny Glossy Pantyhose Tights Stockings Nylons

$8.00

View Details
1x Marvel Go Album All 1-5 Stars Sticker (Mono_poly_go Stickers)
1x Marvel Go Album All 1-5 Stars Sticker (Mono_poly_go Stickers)

$1.50

View Details
Jigheads 50 Round No Collar Unpainted Jig Heads Choose Size
Jigheads 50 Round No Collar Unpainted Jig Heads Choose Size

$13.95

View Details
Safety Electric Nail Clipper Automatic Thick Nails Trimmer Professional Tool US
Safety Electric Nail Clipper Automatic Thick Nails Trimmer Professional Tool US

$15.60

View Details
Monopoly Go 4⭐ Sticker with the name of IMPOSSIBLE WITH🥇SUPERFAST SENDING 🥇
Monopoly Go 4⭐ Sticker with the name of IMPOSSIBLE WITH🥇SUPERFAST SENDING 🥇

$2.99

View Details
18 in 1 Portable Snowflake Multi Tool Stainless Tool Screwdriver Key Chain Camp
18 in 1 Portable Snowflake Multi Tool Stainless Tool Screwdriver Key Chain Camp

$2.99

View Details
1/16 oz Round Jig Heads With #4 Lil Nasty Sickle Hook (100)Free Shipping
1/16 oz Round Jig Heads With #4 Lil Nasty Sickle Hook (100)Free Shipping

$19.00

View Details
Kansas City Chiefs Embroidered 4" Iron On Patch
Kansas City Chiefs Embroidered 4" Iron On Patch

$3.50

View Details
FEM, Power Gain And OML Plus Frutas, Free Shipping
FEM, Power Gain And OML Plus Frutas, Free Shipping

$110.00

View Details
Unbranded Socks Men's Gray New without Tags
Unbranded Socks Men's Gray New without Tags

$4.99

View Details