Audison APS 8R Prima Series 8" 4Ω SVC Sub for Ported Enclosures (.3 CuFt. min)

Description: APS 8 R - SUBWOOFER 200mm 4Ohm With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AP8.9 bit or AP4.9 bit / AP4 D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully desi Home Contact Us Mobile Marine Powersports Audison APS 8R Prima Series 8" 4Ω SVC Sub for Ported Enclosures (.3 CuFt. min) CONDITION: NEW BRAND: Audison WEIGHT: 8.9100 UPC: - Highlights - • Power Handling: 250W Continuous Power • Power Handling: 500W Peak Power • Impedance: 4 Ohms • Sensitivity: 84 dB • Magnet: High Density Flux Ferrite Description APS 8 R - SUBWOOFER 200mm 4Ohm With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AP8.9 bit or AP4.9 bit / AP4 D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking-mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth. Features - • Ultra-low profile (3.11 in. / 79 mm) for maximum installation flexibility. • Designed to deliver maximum performance in a reflex enclosure starting from 8.5 lt. • Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (almost 9 mm, one-way) while keeping the mounting depth to minimum. • Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure. • Massive motor assembly optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions. • Specifically developed to be combined with either the Audison AP8.9 bit (2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifiers. -->

Price: 219.99 USD

Location: Springfield, Missouri

End Time: 2024-12-11T09:07:11.000Z

Shipping Cost: 0 USD