Armor SX5000 WB Dot-Approved Deep Penetrating Water-Based Silane Siloxane 5 Gall

Description: Store New Arrivals Add to Favorite View Feedback Contact Armor SX5000 WB Dot-Approved Deep Penetrating Water-Based Silane Siloxane 5 Gallon Concrete Sealer - Professional Grade Long Lasting Natural Sealer for Concrete, Brick, Pavers, Stone, and Masonry Description Global Trade Identification Number 00856994005145 Style Compact Compatible Material Pavers, Stucco, Brick, Concrete, Stone Brand Name Foundation Armor Item Dimensions 13 x 13 x 15 inches Color Clear Material Type Resin, Silicone Brand Foundation Armor Material Resin, Silicone Water Resistance Level Water Repellent Item dimensions L x W x H 13 x 13 x 15 inches Item Weight 44 Pounds Surface Recommendation Concrete Item Form Liquid Style Name Compact PROFESSIONAL GRADE SILANE SILOXANE SEALER: Protect your interior and exterior concrete, brick, paver, stone, and masonry surfaces with the professional-grade Armor SX5000 WB water-based Silane-Siloxane concrete sealer.DEPARTMENT OF TRANSPORTATION APPROVED: This deep penetrating, Department of Transportation approved concrete sealer contains up to 5X more active materials than similar sealers in the market.REDUCES WATER ABSROPTION BY UP TO 95%: It chemically reacts to form a water repellent barrier below the surface that will reduce the absorption of water and other liquids by up to 95%.WON’T CHANGE THE LOOK OR COLOR: Formulated with high-quality US-manufactured resins, this concrete sealer is designed to protect your concrete, brick, pavers, stone, and masonry without changing the look, color, or feel.LONG LASTING: The Armor SX5000 WB Silane-Siloxane concrete sealer chemically reacts to form a water repellent barrier below the surface that can last for up to 7-10 years.YEARS OF PROTECTION: By reducing the absorption of water on the surface, damage caused by water absorption is also reduced. Sealed surfaces are more resistant to cracking, spalling, ice damage, salt damage, organic surface growth, and staining.READY TO USE: Our ready-to-use concrete sealer can be applied to a properly cleaned and prepped unsealed surface with pump sprayer. One gallon covers up to 175-225 ft2/gallon. Foundation Armor cleaners and sprayers are available separately.EASY TO MAINTAIN: This water-based silane siloxane concrete sealer is easy to use and easy to maintain. When it is time to reseal, simply apply a single coat of the concrete sealer to a clean and dry surface with a pump sprayer.VERSATILE: The Armor SX5000 WB can be used on a variety of unsealed surfaces including poured concrete, broom finished concrete, stamped concrete, concrete pavers, brick, bluestone, flagstone, granite, natural stone, and masonry.WATER BASED FORMULA: This silane siloxane concrete sealer is water-based. It is easy to use, 0 VOC, and has no odor. Clean-up is quick and easy, and can be done with soap and water. Product Description DOT Approved In Several States Armor SX5000 WB Water-Based Silane Siloxane Sealer for Concrete & Masonry The Armor SX5000 WB is a penetrating water-based Silane-Siloxane sealer. It penetrates deep into the substrate where it chemically reacts to form a barrier within the pores that reduces surface water absorption by up to 95%. It will not change the look or color of the substrate, and it won't leave a visible surface film. Contains up to 5X more active ingredients than similar products on the market.Works entirely below the surface; won't leave a film or coating. Long Lasting Silane-Siloxane Sealer for Concrete, Brick, Pavers, Natural Stone Easy to Apply, Long Lasting The Armor SX5000 WB can easily be applied with a roller or sprayer. Once fully cured, it can last for up to 7-10 years before the need to reseal! Won't Change The Look or Color The Armor SX5000 WB works entirely below the surface. It won't leave a slippery or visible surface film, and it won't change the look or color. Breathable, UV Resistant The Armor SX5000 WB is breathable and UV resistant. It will never yellow, peel, flake, or fade because it works entirely below the surface. Reduces Water Absorption The Armor SX5000 WB will reduce the absorption of surface water and other liquids by up to 95%, reducing damage caused by water absorption and salt. Reduces Staining & Damage Reduces Surface Stains The Armor SX5000 WB reduces the absorption of water and other liquids by up to 95%. It helps keep liquids closer to the surface for easier cleaning. Reduces Salt Damage The Armor SX5000 WB will reduce damage caused by water absorption from the use of de-icing salts. Reduces Surface Growth The Armor SX5000 WB will reduce organic growths on the surface. Reduces Cracking The Armor SX5000 WB will reduce damage caused by freeze-thaw cycles and water absorption such as cracking, spalling, and pitting. How To Apply Surface Preparation: The Armor SX5000 WB should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While the surface may appear dry and feel dry to touch, water below the surface trapped in the pores can cause the same issues. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains. If the surface is smooth troweled, or does not easily accept water, acid etching may be required prior to applying sealer. It is always suggested to apply the Armor SX5000 WB to a test area to verify absorption, coverage, compatibility, and project suitability. The Armor SX5000 WB is designed specifically for unsealed concrete and masonry surfaces. Do not apply this product over a surface recently sealed with a penetrating sealer, or previously sealed with a film-forming sealer or coating. The Armor SX5000 WB can be applied over surfaces treated with a Silicate sealer so long as it has been at least 7 days. It can also be re-applied to a surface previously treated with a Silane-Siloxane sealer so long as it has been a few years, and the surface is able to quickly and easily absorb water. Application: A commercial pump sprayer is recommended to achieve the best coverage and results. Be sure the psi is no greater than 20. Use a .3-.5 GPM adjustable cone tip. Sprayer Suggestion: Armor Industrial Sprayer, ASIN B0CDXT17PD. Apply the first coat of Armor SX5000 WB, ensuring the entire surface is evenly saturated. Wait at least 10-15 minutes, then apply the second coat. Do not flood the surface or allow puddles to form, this will result in over application and the formation of dark spots on the surface. Less porous surfaces, such as bluestone, flagstone, and slate, may only require one coat. Substrates sealed with Armor SX5000 WB may be coated with silicone emulsion paints and many oil based paints once the surface has had 72 hours to dry. Testing is always necessary and recommended to assure proper adhesion. Adhesion may be improved if the surface is pressure washed and allowed to dry prior to application. Armor SX5000 WB is not a paint primer. Adhesion of cementitious coatings, stucco, plaster, etc., may be adversely affected. These types of substrate treatments should be installed and allowed to fully cure before applying Armor SX5000 WB. Always test to verify compatibility. Time of Day: The temperature of the air and surface must be 55-85 degrees F during application. If freezing conditions exist prior to application, it is highly recommended that the substrate be allowed to fully thaw. Should this recommendation not be followed, the product may not yield adequate protective properties. Once applied, the surface should be kept dry for at least 24 hours. Clean-Up: Use warm water and soap. Dispose of containers in accordance with local and federal regulations. Product Removal: Armor SX5000 WB penetrates deep into to the surface. Removal is not recommended. Up to 175 FT2/gallon In One Coat Coverage Porous Surfaces: Up to 175 FT2/gallon in one coat. Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat. Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance. Less porous surfaces, such as bluestone, flagstone, and slate, may only require one coat. Frequently Asked Questions What is the difference between the Armor SX5000 and Armor SX5000 WB? The Armor SX5000 and Armor SX5000 WB offer identical benefits when it comes to life and performance. Whether or not you choose to apply the Armor SX5000 or Armor SX5000 WB will depend on whether you prefer a water-based sealer or a solvent-based sealer. How long does the "bead" last? Surface water beading will not occur on all surfaces. While some surfaces may experience an instantaneous bead, others won’t experience a surface water bead at all. Surface water beading is not a sealer benefit. Surface water bead is caused from resin build-up on the surface. Once the resin build-up goes away, so will the bead. The Armor SX5000 WB is designed to work entirely below the surface so its benefits are made visible through performance. You will find sealed surfaces dry faster, are easier to clean, and experience less damage caused by freeze-thaw cycles and de-icing salts. Will it make the surface slippery? The Armor SX5000 WB does not leave behind a surface film and does not change the surface traction of the substrate. If the surface was non-slip before being sealed, it will remain non-slip after being sealed. Will it give a wet look or gloss? No, the Armor SX5000 WB will not give you a wet look or gloss. The Armor SX5000 WB will not change the look or color and you surface will look exactly as it did before being sealed. If you want a wet look sealer, consider the Armor WL550, Armor AR350, Armor WB25, or Armor AR500. Other Foundation Armor Products To Consider: Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.6 out of 5 stars 1,000 4.5 out of 5 stars 346 4.4 out of 5 stars 431 4.6 out of 5 stars 2,112 4.5 out of 5 stars 862 4.5 out of 5 stars 73 3.8 out of 5 stars 13 Price $224.99$224.99 $249.99$249.99 $249.99$249.99 — — $162.45$162.45 $169.99$169.99 Type of Sealer Silane-Siloxane Silane-Siloxane Hybrid Acrylic Acrylic Acrylic Sealer Applicator Base Water-Based Solvent-Based Solvent-Based Solvent-Based Solvent-Based Water-Based Stainless Steel Look Natural Natural Matte Wet Look Low Gloss Wet Look High Gloss Wet Look High Gloss Stainless Steel For Concrete ✔ ✔ ✔ ✔ ✔ ✔ ✔ For Concrete Pavers ✔ ✔ ✔ ✔ ✔ ✔ ✔ For Brick, Natural Stone ✔ ✔ ✔ ✘ ✘ ✘ ✔ ABOUT US We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. SHIPPING We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control. We offer free shipping to the lower 48 states and ship within 5 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address. For shipping outside of the continental USA, we only use eBays Global Shipping Program.The item is shipped to KY and then sent to the rest of the world. International customers are responsible for all duties and taxes. Continue to check out in order to calculate costs for shipping the item to your country. Messages regarding eBays Global Shipping Program MUST be directed at eBay EXCLUSIVELY. RETURNS We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA. PAYMENT We accept PayPal. CONTACT US This page content is yet to come Please ad us to your favorite seller and visit again later Thank You CUSTOMER SATISFACTION We try our very best to make sure every customer is completely satisfied. If theres a problem, message us! Were happy to help. WE ACCEPT Copyright © 2021 AutoDS. | All Rights Reserved

Price: 223.89 USD

Location: Hongkong

End Time: 2024-12-14T02:48:04.000Z

Shipping Cost: 0 USD