Description: Application : 1 : It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc. 2 : It can also be used to detect infrared wave forms. 3 :It also can detect zener diode and has the function of self-calibration. Features : This transistor tester is built-in large-capacity rechargeable lithium battery-350mAh Included, lithium battery voltage detection, Automatic measurement of voltage stabilizing diode (0.01-30V). After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. Specifications: Material: ABS Battery: 1 * lithium battery, 350mAh (included) Display: 35 * 30mm TFT screen Diode range: ＜4.5V Zener diode: transistor detect area: 0.01-4.5V zener diode detect area: 0.01-30V Triac range: IGT ＜ 6mA Capacitance: 25pF-100mF Resistor: 0.01-50MΩ Inductance: 0.01mH-20H Battery: 0.1-4.5V Note : 1 : be sure to DISCHARGE capacitors before connecting them to the tester! The tester may be damaged before you have switched it on 2 :We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged This transistor tester is built-in large-capacity rechargeable lithium battery-350mAh Included, lithium battery voltage detection, Automatic measurement of voltage stabilizing diode (0.01-30V). After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. Operating Instructions : Short press: Press the key and not less than 10 ms, release key within 1.5 seconds ; Long press: Press the key more than 1.5 seconds
Price: 40.61 USD
Location: Brentwood, New York
End Time: 2024-12-16T23:18:15.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: AITRIP
Type: Does not apply
EAN: 0701715444133
Package Dimensions LxWxH: 5.83x3.98x1.65 Inches
ISBN: 0701715444133
Color: LCR-TC1
Weight: 0.29 Pounds
