AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant 42 Inch, Blue

Description: AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant 42 Inch, Blue Product Details Size: 42 Inch Material: Brass, Plastic, Rubber, Steel Brand: JIFETOR Color: Blue Connector Type: Elbow Thread Size: 0.25 inch Exterior Finish: Brass Thread Type: BIT Item Weight: 14.08 ounces Number of Pieces: 1 AC U Charge Hose: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42 inch, with one side 1/4 inch female fittings connected with R134a can tap, and the other side 1/4 inch female fittings for R134A quick coupler or connect AC service port directly Refrigerant Charging Gauge: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4 inch big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. (NOTE: Use valve core tool to unscrew the valve core thimble a little bit if the hose angled connector would not depress the Schrader valve) Brass Quick Coupler: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with standard R134A low pressure side suction service port. Aim at R134A suction service port, push to connect and lock. Pull up the knurled grip ring to loose and lift to disconnect. Can Tap: Brass can tap with 1/2 inch female thread interface, can screw to fix on 1/2 inch male thread of refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. Equipped with 1/4 inch male flare on the side, to hook directly to 1/4 inch female fittings of AC refrigerant charging hose Measure Pressure and Recharge R134A: Start the car, open AC to MAX. Clockwise twist T handle to close can tap, connect the quick coupler and car AC suction service port to measure the pressure. The reading is right only when AC compressor is working. If need to charge the refrigerant, please compare to the manufacturer's recommended readings, choose the appropriate amount refrigerant can, to ensure there is no leftover in the can. Simple R134A Charging Tool: This air conditioning refrigerant charge hose gauge is very simple, only 42 inch long and equipped with gauge can tap quick coupler. Also it is very easy to operate dynamic pressure measurement and refrigerant charging from auto low pressure suction service port.

Price: 25.04 USD

Location: New York, New York

End Time: 2024-10-15T23:13:45.000Z

Shipping Cost: 0 USD