Description: - - - We process and ship orders multiple times per day to get your order out to you as quickly as possible! :) You will receive the following 8 pieces of 3:1 dual-wall RED tubing: 1 foot 3/32"(1.6mm) tubing (not pictured)1 foot 1/8"(2.4mm) tubing (not pictured)1 foot 3/16"(3.2mm) tubing1 foot 5/16"(6.4mm) tubing1 foot 3/8"(9.5mm) tubing1 foot 1/2"(12.7mm) tubing1 foot 3/4"(19.1mm) tubing1 foot 1.0"(25.4mm) tubing Premium-Quality Dual-Wall Polyolefin Heat Shrinkable Tubing Wall Type: DUAL-WALL (Inner wall of "hot melt adhesive" to encapsulate and protect your wires! Sized by: ID (Inner Diameter) Shrink Ratio: 3 to 1 - This premium tubing has an inner wall of adhesive/glue which melts when heated to encapsulate your wire and protect it from the elements Uncut tubing or longer lengths are almost always available upon request! Just contact us! If you need 4:1 ratio, dual-wall (ADHESIVE) tubing, go here: https://www.ebay.com/itm/203049769480 If you need 4:1 ratio, dual-wall (ADHESIVE) tubing, go here: https://www.ebay.com/itm/203049856945 If you need 2:1 ratio, single-wall tubing, in SMALL sizes, go here: https://www.ebay.com/itm/203049859100 If you need 2:1 ratio, single-wall tubing, in LARGE sizes, go here: https://www.ebay.com/itm/203049616047 When choosing sizes, make sure you are thinking in terms of DIAMETER. Diameter is the measure of a round object, not flat. Larger sizes may be flat prior to usage, but they are still ALWAYS sized by ID (inner diameter). Refer to the chart/diagram in the additional photos for further reference! SUMMARY:Made of premium cross-linked polyolefin, a robust and versatile material with excellent properties and durability3 to 1 shrink ratio; will shrink to one third of the nominal (named) diameterDual-wall adhesive-lined; when heated, the inner glue-lining will melt and seal your wires to protect themThe tubing is sized by ID (inner diameter). Diameter is the measure of a ROUND shape, not flat.There is no printing/specs on this tubing! RECOMMENDED EQUIPMENT:"Heat gun" or specialized "task oven" to shrink the tubing at 90°C to 110°CelsiusNon-flammable and ventilated workspaceSafety gloves, protective eyewear, respiratory mask SAFETY/TIPS:Do not perform repairs of electrical/electronic components unless you are a qualified, experienced, and knowledgeable professional. Performing repairs can be very dangerous. Don't do something stupid! Seek professional assistance/advice!The tubing, adhesive, and items you are working with can get very hot! Be careful not to burn yourself - avoid touching heated objects/materials!Heat-resistant gloves, protective eyewear, and respiratory mask are all recommended. Work in a well-ventilated area and non-flammable workspace. Clear your surroundings to avoid accidents! This includes children and pets!Read and obey all safety instructions for operation of the heat source you choose to utilize when heating the tubing. "Heat guns" or specialized "task ovens" are recommended. Do not exceed 110 degrees Celsius when shrinking the tubing to avoid burning/degrading the tubing! Hair driers do not get hot enough to shrink most tubes, however they may be useful for tiny sizes. Torch/flame is not recommended as you may burn/damage the tubing.While heated, the tubing is in a softened state until it cools, and thus may be easily damaged. Avoid stretching the tubing until it cools and firms up. USAGE INSTRUCTIONS:Read safety guidelinesPrepare equipment and work areaSlide tubing over wireApply heat to tubing to reach 90°C to 110°CelsiusAllow tubing and wire to cool HANDY TIP: The tubing is sized by ID (inner diameter). If you only know the flat width of the tube size you need (measuring across a flattened tube), but aren't sure what ID you should choose, you can quickly approximate diameter by dividing by 1.6! For example: If you need a tube that is 3 inches wide when flattened, you would divide 3" by 1.6, which equals 1.875". That means you should order the 2" ID tube
Price: 10.95 USD
Location: Pompano Beach, Florida
End Time: 2024-09-11T00:06:15.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Country/Region of Manufacture: China
Model: 3:1 Ratio Dual Wall
Minimum Operating Temperature (Actual): -45℃
Nominal Inside Diameter (ID): 1/16" to 1.0"
Standards/Compliance: RoHS
Type: Heat Shrink Tubing
Maximum Operating Temperature (Actual): +125℃
Actual Length (Feet): 1 Foot
Length Type: 1 Foot pieces
Sheath Color: Red
MPN: Does Not Apply
Brand: Unbranded/Generic
Heat Shrink Ratio: 3:1
Material: Polyethylene (PE)