4R70W 4R75 Ford Valve Body Plate Super Tuff Superior K0192 fits L2008-on V6

Description: 4R70W 4R75 Transmission Valve Body Separator PlateFits 2008-up V6 ApplicationsSuper Tuff PlateProblem SolverMade in the U.S.A., both 4R75 SuperTuff plates (K092 & K0192) are zinc coated and extra thick to stop flex and cracking. Both plates come with our famous “Snubber” to correct the wear on the nub of the 2-3 accumulator spring retainer. While they’re the perfect replacement for a “stock” valve body plate (just match up your original 1-2 plate hole size) for correct use. If you prefer the Original K092 SuperTuff Plate with the .092″ 1-2 feed hole size, we find it works best with kits and upgrades and can be drilled larger to match “kit” instructions for feed hole size and accumulator spring choices.Got a Smaller 1-2 feed orifice? That’s where the “Choice” comes in. With the NEW K0192 SuperTuff plate, the new smaller .073″ 1-2 feed hole works as a stock replacement on the later model 4R75’s that came with a smaller 1-2 feed hole, and factory accumulator springs. It replaces stock plates found in most V-6/small V-8 units from 2008-current production. The good news is you can now keep your late accumulator spring set up if you just want to change the stock plate without firming the 1-2 shift. you can always use the K0192 as a start and if you want it firmed up, just drill the .073″ 1-2 feed orifice to whatever size you want. Remember, either plate can be modified when using your favorite Superior Shift Correction Package or Fairbanks Performance Product. Complete instructions on use and hole locations come with both SuperTuff Plates. PART# K092 with a .092″ 1-2 feed hole or use PART# K0192 with a .073″ 1-2 feed holeYOU NOW HAVE A CHOICE! Giving You Two Superior Options! A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important InformationShippingReturnsCore PolicyImportant InformationShippingReturnsCore Policy As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items4R70W 4R75 Transmission Valve Body Separator Plate Fits 2008-up V6 Applications Super Tuff Plate Problem Solver Made in the U.S.A., both 4R75 SuperTuff plates (K092 & K0192) are zinc coated and extra thick to stop flex and cracking. Both plates come with our famous “Snubber” to correct the wear on the nub of the 2-3 accumulator spring retainer. While they’re the perfect replacement for a “stock” valve body plate (just match up your original 1-2 plate hole size) for correct use. If you prefer the Original K092 SuperTuff Plate with the .092″ 1-2 feed hole size, we find it works best with kits and upgrades and can be drilled larger to match “kit” instructions for feed hole size and accumulator spring choices. Got a Smaller 1-2 feed orifice? That’s where the “Choice” comes in. With the NEW K0192 SuperTuff plate, the new smaller .073″ 1-2 feed hole works as a stock replacement on the later model 4R75’s that came with a smaller 1-2 feed hole, and factory accumulator springs. It replaces stock plates found in most V-6/small V-8 units from 2008-current production. The good news is you can now keep your late accumulator spring set up if you just want to change the stock plate without firming the 1-2 shift. you can always use the K0192 as a start and if you want it firmed up, just drill the .073″ 1-2 feed orifice to whatever size you want. Remember, either plate can be modified when using your favorite Superior Shift Correction Package or Fairbanks Performance Product. Complete instructions on use and hole locations come with both SuperTuff Plates. PART# K092 with a .092″ 1-2 feed hole or use PART# K0192 with a .073″ 1-2 feed hole YOU NOW HAVE A CHOICE! Giving You Two Superior Options! 4R70W 4R75 Transmission Valve Body Separator PlateFits 2008-up V6 ApplicationsSuper Tuff PlateProblem SolverMade in the U.S.A., both 4R75 SuperTuff plates (K092 & K0192) are zinc coated and extra thick to stop flex and cracking. Both plates come with our famous “Snubber” to correct the wear on the nub of the 2-3 accumulator spring retainer. While they’re the perfect replacement for a “stock” valve body plate (just match up your original 1-2 plate hole size) for correct use. If you prefer the Original K092 SuperTuff Plate with the .092″ 1-2 feed hole size, we find it works best with kits and upgrades and can be drilled larger to match “kit” instructions for feed hole size and accumulator spring choices.Got a Smaller 1-2 feed orifice? That’s where the “Choice” comes in. With the NEW K0192 SuperTuff plate, the new smaller .073″ 1-2 feed hole works as a stock replacement on the later model 4R75’s that came with a smaller 1-2 feed hole, and factory accumulator springs. It replaces stock plates found in most V-6/small V-8 units from 2008-current production. The good news is you can now keep your late accumulator spring set up if you just want to change the stock plate without firming the 1-2 shift. you can always use the K0192 as a start and if you want it firmed up, just drill the .073″ 1-2 feed orifice to whatever size you want. Remember, either plate can be modified when using your favorite Superior Shift Correction Package or Fairbanks Performance Product. Complete instructions on use and hole locations come with both SuperTuff Plates. PART# K092 with a .092″ 1-2 feed hole or use PART# K0192 with a .073″ 1-2 feed holeYOU NOW HAVE A CHOICE! Giving You Two Superior Options! A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important Information As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Shipping Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. Returns 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply Core Policy If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items 4R70W 4R75 Transmission Valve Body Separator PlateFits 2008-up V6 ApplicationsSuper Tuff PlateProblem SolverMade in the U.S.A., both 4R75 SuperTuff plates (K092 & K0192) are zinc coated and extra thick to stop flex and cracking. Both plates come with our famous “Snubber” to correct the wear on the nub of the 2-3 accumulator spring retainer. While they’re the perfect replacement for a “stock” valve body plate (just match up your original 1-2 plate hole size) for correct use. If you prefer the Original K092 SuperTuff Plate with the .092″ 1-2 feed hole size, we find it works best with kits and upgrades and can be drilled larger to match “kit” instructions for feed hole size and accumulator spring choices.Got a Smaller 1-2 feed orifice? That’s where the “Choice” comes in. With the NEW K0192 SuperTuff plate, the new smaller .073″ 1-2 feed hole works as a stock replacement on the later model 4R75’s that came with a smaller 1-2 feed hole, and factory accumulator springs. It replaces stock plates found in most V-6/small V-8 units from 2008-current production. The good news is you can now keep your late accumulator spring set up if you just want to change the stock plate without firming the 1-2 shift. you can always use the K0192 as a start and if you want it firmed up, just drill the .073″ 1-2 feed orifice to whatever size you want. Remember, either plate can be modified when using your favorite Superior Shift Correction Package or Fairbanks Performance Product. Complete instructions on use and hole locations come with both SuperTuff Plates. PART# K092 with a .092″ 1-2 feed hole or use PART# K0192 with a .073″ 1-2 feed holeYOU NOW HAVE A CHOICE! Giving You Two Superior Options!

Price: 34.1 USD

Location: Shepherdsville, Kentucky

End Time: 2024-02-08T13:55:37.000Z

Shipping Cost: N/A USD