Description: 36V Charger Output 42V PowerFast Mini 3-Prong Inline Connector for 10Series Lithium Battery Compatible with 36V Pocket Mod Sports Millet Electric Board Description FAST CHARGING-2 Hours to achieve a full charge with 42V, 1.5A OUTPUT World Wide Input Voltage 100-240VAC 50/60Hz Works as genuine parts, With Short Circuit Protection, Be safe to use. Condition: Brand New 100% EASY CARRING-Extremely light and small: size 12cm*5.5cm*3cm weight： about 0.37lb Type:42V 1.5A -Input: 100-240V, 50/60Hz, -Output : 42V 1.5A (PowerFast 3-Prong Inline Connector) Package Include: 1 X 42V 1.5A AC Power Charger 1 X 0.8m Power cord(US Plug) The 2A Charger: Use and maintenance of the charger : 1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug. If you pull the battery plug first while charging, especially when the charging current is large (red light), it is very easy to damage the charger. 2. When the LED light turns green, please continue charging for 2-3 hours. 3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged. 4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting, which is conducive to the activation of long-term immobile material in the deep part of the battery. Luminous means that riding the controller battery undervoltage protection action. 5. If your battery has not been used for a long time (2-3 months), please charge the battery before using it. Make sure your battery is not broken. 6.Please use the charger in a dry place in time. 7.When you do not use the charger, do not always connect the power supply. 8.Please confirm your battery, Because it is used to charge the lithium battery. Do not use the charger on the LiFepo4 battery, otherwise the charger will be got incredibly hot. Features & details Input:100-240VAC,50/60Hz,1.2A Output:42V--1.5A, mini 3 prong connector show:"1"means "＋", "2" means "-", “3”means ground, The plug's Diameter is 8.8mm(0.31in), please check the size before order. 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum. The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking. The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable. The Charger protected: Short circuit protection/ over current protection/ over voltage protection; red light -- charging, green light -- charge OK, it stop automatically when the battery is full. Replace your broken charger or add an extra charger to charge in 2 locations without taking the original charger with you To make your batteries last 10X longer, avoid using batteries below 35% and don’t charge above 85-90%
Price: 11 USD
Location: Bedford, Ohio
End Time: 2024-12-22T21:59:16.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: TANGSPOWER
Type: Mains Charger
Voltage: 36 V
