Description: rowser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser. 3 PCS - Micro Effects light Pure Red 3 pcs MEL-PR1 (MEL Pure Red), DC barrel connector LED light3 PCS 9 volt battery clips ***Batteries not included *** The MEL (Micro Effects Light) is a series of simple low cost LED light sources with a built in DC barrel type connector. The 2.1 x 5.5mm barrel connector is very common for many low voltage DC power applications simplifying the building of a micro effects lighting system in a modular fashion. The MEL operates from 9 – 12 volts DC which allows a simple effects system operating from a 9 volt battery possible. More complex systems with numerous micro effects lights are possible from a 12 volt DC power source. Lighting systems can range from a single MEL to over 100 MELs depending on the complexity of a lighting project. The MEL is optimized for high light output at 9 volts DC with a nominal power of 0.18 watts operating at 20ma ref. With an input of 12 volts, a power consumption of 0.34 watts is typical, operating at 28ma ref. With input higher than 12 volts there is a diminishing light output due to thermal loading of the LED. The MEL is dimmable by either PWM (Pulse Width Modulation) type dimmers or with variable voltage input from 7 – 12 volts DC. The MEL can be made with pure fully saturated LED colors and with phosphor converted colors for a wide color gamut. The LED lens is water clear with a 30 degree output angle for a narrow beam. The MEL may be operated from a 9 volt battery for portable applications. When using a 9 volt battery it is recommended that the number of MELs does not exceed six in order to limit the load current to about 120ma for battery life. The MEL is equipped with a barrel connector type DC power jack to mate with a plug of the same type. The MEL uses a positive center power connection. The axial body of the MEL LED is of a small size and molded in black ABS resin. The MEL body overall length is 1.42” (36mm) and the diameter is 0.48” (12.2mm) nominal. Well suited for various LED lighting applications such as: Scenery / Props / Models / Animatronics / RoboticsFx- Special effects / costumes Theatrical stage and set obstruction markingTheming, décor lighting and promotion display productsAmusement, arcade, gaming and entertainment lighting Specialty miniature accent lighting, micro fixtures, micro ceiling drop pendant lightingSales and trade show displays and signage Technical stuff: Characteristics 1) DC Barrel Connector female Jack accepts 2.1mm x 5.5mm plug with center positive. 2) Body shell: ABS (black). 3) Volts DC (VDC): 9-12 nominal (continuous), Max 12.5 4) Current (ref.): 20ma @ 9 VDC, 28ma @ 12 VDC, 35ma Max. 5) Power (nominal): 0.18 watts at 9 VDC, 0.34 watts at 12 VDC, 0.44 watts Max. 6) Output: Pure Red (high intensity, 30 degree lens, clear) 7) Color Coordinates CIE1931: x=0.65 /y=0.31 Ref. Notes / Cautions 1) Intense light source, for eye safety do not look directly into the beam at close range. 2) This lighting device is static sensitive, retain protective shipping bag for storage to protect from ESD (Electro Static Discharge) damage. 3) Observe correct polarity when connecting power, damage may result from unintended reverse polarity. 4) Device meets Rohs requirements
Price: 9.99 USD
Location: Troy, Michigan
End Time: 2024-08-17T23:58:39.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Size: 3m
Number of Lights: 20
Type: Spot Light
Color: Red
MPN: MEL-PR1-9V-3P
Brand: Prop and Scenery Lights, LLC
Country/Region of Manufacture: China
Power Source: Battery
Light Color: Red
Lighting Technology: LED
Voltage: 9V
