3MOA Green Dot & 64 MOA Ring Reticle Sight CYELEE WOLF2-G for RMR Cut Canik SFX

Description: NOTE: We are currently unable to deliver to APO Army/Air Force Post Office, FPO Fleet Post Office, DPO Diplomatic Post Office If you need a Dovetail mount plate, you can refer to the following ebay link: NOTE: Mount plate length: 48.8mm/1.9inch . Width: 28.5mm/1.1in For Taurus PT111 G2, Millennium G2, G2, G2c, G2s, andoriginal G3, or TX22 For All Glock Taurus G3 G3C For CZ 75B 85B 97B P-07 P-09 The WOLF2 has a long-lasting battery life from a single CR1632 which is easily replaced without need to remove the optic. Featuring adjustable brightness levels that make sense, low-profile buttons for concealed carry use, and a large crisp objective lens with great styling. *ONLY FOR RMR FOOTPRINT**ONLY FOR RMR OR 407C/507C FOOTPRINT*Always Ready, Always OnMDS Stands for Motion Deactivated Standby, Cyelee Optics products will NEVER have an automatic shut-off, they can ONLY be shut off by manually holding the down/- button for 4 seconds. However while ON the optic is always checking if it needs to go into MDS Mode. Walking with, or even heavy footsteps near your optic, will keep your optic awake, however, if it senses no movement for 5-7 minutes it will enter MDS Mode, when it senses motion in MDS Mode it will display the red dot within a second.*ONLY FOR RMR OR 407C/507C FOOTPRINT*The STIG-RS(Astigmatism Relief System) reticle system, is made for users with astigmatism, and feedback is clear, many see benefits using our STIG-RS LED emitters. Additionally, a larger 64MOA circle allows for lower brightness settings without harming reticle acquisition time, passively assisting.Previous pageWindowless Waterproof LED Emitter TechnologyYou will never have to clean your LED emitter window again while remaining fully IPX7 waterproof!Next pageWindowless Waterproof Made for Concealed Carry Protective Cover Included*ONLY FOR RMR OR 407C/507C FOOTPRINT*SpecificationsLens Diameter: 24mmIllumination Settings: 8 Daytime / 2 Night timeElevation/Windage Adjustment Range: +/- 40 MOA, Adjustment: click adjustReticle: Green Circle Dot ReticleBattery: 1 x CR1632 with up to 50,000 hours of battery lifeSlide/Pistol/Handgun CompatibilitySlide CutMade specifically to fit mounts or slides cut for RMR/SRO or 407C/507C/508T products. *ONLY FOR RMR OR 407C/507C FOOTPRINT*For GlockFor GLOCK MOS Using RMR adapter plate (Plate not included) - (excludes Slimline models, such as glock 43x mos/ glock 48 mos）For WaltherFor Walther Arms Q4/A5/PDP Using RMR adapter plate (Plate not included)For Springfield ArmoryFor Springfield Armory OSP(full-size models) Using RMR adapter plate (Plate not included), Not for hellcat/ hellcat pro/XDS MOD 2 OSPFor CZFor CZ-P10 F/C Using RMR adapter plate(Plate not included)For Smith & WessonFor Smith & Wesson C.O.R.E. Using RMR adapter plate(Plate not included)For FNFor FN 509 MRD & Tactical Series/FNX Using RMR adapter plate(Plate not included)For TaurusFor Taurus G3/G3C T.O.R.O Using RMR adapter plate(Plate not included)For BerettaFor Beretta APX RDO Using RMR adapter plate(Plate not included)For CanikFor Canik TP9SFx, Canik TP9 Elite Combat, Canik TP9SF pistols Using RMR adapter plate, Canik TP9SA pistols using RMR adapter plate(Plate not included)MICRO COMPACT PISTOLDOES NOT FIT MICRO COMPACT PISTOLStatementAll product and company names are trademarks or registered trademarks of their respective owners. Their use does not imply affiliation or endorsement by these companies. All product names, logos, brands and other trademarks or images shown or mentioned are the property of the respective brand owners.NoticeCompatibility may be based on screws not included with the optic. A minimum of 4 properly seated thread lengths on both screws that are securely attached to the slide should be maintained at all times for safe operation. Please clean slide and screw holes before installing, inspect before using, and use self supplied thread locker if deemed necessary.

Price: 132.78 USD

Location: Houston, Texas

End Time: 2024-01-18T15:51:30.000Z

Shipping Cost: 0 USD