25 Psi Water Pressure Reducer Regulator For Drip Irrigation System 3/4 Inch Hose

Description: This heavy duty 25 psi lead-free brass pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired. Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA and Canada. Maintains water pressure between 20-30 psi (25 psi nominal). 0-6.5 GPM (gallons per minute) flowrate. Maximum Inlet Pressure: 150 psi. Note: As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut. Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib or garden hose in USA and Canada. It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead. Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight. Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time.

Price: 17.53 USD

Location: Casper, Wyoming

End Time: 2024-01-15T00:11:13.000Z

Shipping Cost: 0 USD