Description: OBD2 Code Reader Car Engine Fault MIL Turn Off O2 Sensor EVAP Test DIYer Scanner LAUNCH CR319, as a practical OBD2 portable scan tool specially designed to work with all OBDII/CANcompliant vehicles, featuring full OBDII functions, DTC lookup with multi-languages support etc., is a great choice for any beginners and average car owners to facilitate their vehicle repair work. CReader 319 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4. Functions Engine Check IncludingRead codeRemove codeLive dataFreeze frameI/M readnessFreeze prameO2 sensor testOn-Board MonitorEVAP system Vehicle Information reading Let Launch CR319 To Be Your Best Car Partner1. Ready to Check Why Check Engine Light On? (Malfunction Indicator Light)2. Help to Pass vehicle safety inspection and emissions inspection3. Assist to fix five most common car issues:*OXYGEN SENSOR*ENGINE MISFIRE.*EVAPORATIVE SYSTEM.*EXHAUST GAS RECIRCULATION (EGR)*CATALYTIC CONVERTER. Features Functional All Modes of OBDII Diagnostics This tool works on MOST OBDII/CAN protocol compliant 1996 US-Based, 2000 EU-Based and Asian cars. It can check all engine related trouble codes from Vehicle ECU (Electronic Control Unit) via check engine light, I/M monitor readiness test, view live data, view freeze frame data, read and clear codes etc, which is to say, it gets the complete 10 modes of OBDII test for technicians to diagnose the trouble fast and accurately as follows: Mode 01: Request current power train diagnostic data.Mode 02: Request freeze frame information.Mode 03: Request emissions-related diagnostic trouble codes.Mode 04: Clear/reset emissions-related diagnostic information.Mode 05: Request oxygen sensor monitoring test results.Mode 06: Request on-board monitoring test results for specific monitored systems.Mode 07: Request emission-related diagnostic trouble codes detected during current or last completed driving cycle.Mode 08: Request control of on-board system, test or component.Mode 09: Request vehicle information. Mode 10: Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information service. Turning off the Check Engine Light Malfunction Indicator Light (Service Engine Soon, Check Engine) is a term used for the light on the instrument panel, which is designed for alerting the drivers or the repair technicians that there is a problem with one or more vehicle's systems and those problems may cause emissions to exceed federal standards. With CR319, you are able to locate the error place and turn off the check engine light after completing the full diagnoses with ease. For Passing Emission Test Smoothly I/M readiness is used to check the readiness of the monitoring system. It is an excellent function to use prior to having a vehicle inspected for compliance to a state emissions program; O2 Sensor Test allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer. On-Board Monitor allows you to view the results of On-Board Monitor tests. The tests are useful after servicing or after erasing a vehicle's control module memory. Quick Get Effective Diagnostic Result Live Data Stream: displays the real time PID data from ECU. The displayed data includes analog inputs and outputs, digital inputs and outputs, and system status information broadcast on the vehicle data stream. Freeze Frame Data: When an emission related fault occurs, the OBD II system not only sets a code but also records a snapshot of the vehicle operating parameters to help identify the problem. Vehicle Information: The option displays the vehicle identification number (VIN), the calibration identification, and the calibration verification number (CVN), and other information of the test vehicle. Useful & Practical DTC Lookup Library One of the best things about using the Launch CR319 as an engine code reader is that it has a lookup library, which is used to search for definitions of DTCs stored in the build-in DTC library and for DTC Guide information. Every code comes with a description to aid technicians in efficient vehicle diagnostics and repair. Vehicle Coverage & Languages Supported If you have an OBDII compliant vehicle, then chances are that Launch CR319 can help you diagnose it. This is because the scanner is compatible with most American, European, and Asian models manufactured as from 1996.It supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network). It also supports seven languages that includeEnglish, Portuguese, Russian, Italian, Spanish, French, and German. The DIYers needs no effort in trying to get translations in as far as the code meanings and repair formulas are concerned. Plug & Play, Not Require Any Battery Other Abundant User-Friendly Features Vehicle Coverage Australian Cars:Need Standard OBD2 Protocols from 2006 to now. for AUST-Ford, for Holden ... American Cars:Need Standard OBD2 Protocols from 1996 to now. for Chrysler, for Ford, for GM, For Jeep ... European Cars:Need Standard OBD2 Protocols from 2004 to now. For Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, forSeat, forPeugeot,for Renault, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Citroen, for Volvo, for Fiat, for VW, for Ford, for Jaguar... Japanese/Korean Car:Need Standard OBD2 Protocols from 2006 to now for KIA, for Isuzu,for Honda,for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota... Chinese Car: Need Standard OBD2 Protocols from 2008 to now NOTE: Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is a special design, so it may not compatible with some cars which do not support OBD2 protocol. NOTICE By clearing trouble codes you also clear the readiness status for the individual emission system readiness tests. In order to reset these monitors, the vehicle must be driven through a complete drive cycle with no trouble codes in memory. Amount of time needed for reset vary by vehicle.Do not erase the codes before repairs or services have been performed. Codes will again display if the underlining fault causing the code is not addressed. Please close the anti-virus software in your PC when updating the device. Specifications Screen: 1.77 " TFT, 160*128dpiVoltage Range: 9-18VOperating Temperature :0℃ -50 ℃ (32 ℉ -122 ℉ )Environment Temperature:-20 ℃ -70 ℃ (-4 ℉ -158 ℉ ) Weight: <200g PaymentDelivery detailsTerms of salesAbout usContact usPayment1.We accept Credit cards、Debit card、Apple Pay、Google Pay、PayPal ect. payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 4 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any. 7.We reserve the final right of sellingDelivery detailsShipping: Order will be shipped within 1-3 business day after payment confirmed. We have warehouse in USA，DE，UK，Australia and China warehouse. From our US/DE/UK/AU warehouse via UPS or DHL eCommerce shipping. Delivery time varies from 2 to 6 business days. From our Hong Kong warehouse via DHL or UPS Delivery time varies from 3 to 10 business days. From our China warehouse Delivery time varies from 3 to 10 business days. We will ship according to your eBay or PayPal address. Please make sure it is correct and include phone number for delivery. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Please include your special requests in eBay note if there is any. We will try our best to give customers good and pleasant parchasing experience. Welcome your any-time order :)Terms of salesWe are authorize distributor, our all items are 100% original and Our devices have warranty, 12 months free repair for the devices. 3 months for the accessories.Please contact us firstly when you need warranty service.In case an item arrives faulty, please contact us in 30 days and keep it unused.We will instruct you on how to return and get refund or replacement.If after 30 days, or the item has been used, we have the right to decline your claim.Items should be returned on buyers' cost for repair or replacement. About usWho We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands, and more brands will be show in our store in near future. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 50 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details. Contact usOur customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.
Price: 19.99 USD
Location: Perth Amboy, New Jersey
End Time: 2023-09-23T16:03:21.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: LAUNCH
Model: Launch CR319
Manufacturer Part Number: Launch CR319 CR3001 CR529
Type: OBD2 EOBD Scanner Code Reader
OBD Interface: CAN, EOBD, OBD, OBDII
Connectivity: OBD2 Cable
Supported System: Engine
Vehicle Type: Passenger Vehicle
Features: Backlit Display, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
Warranty: 1 Year
Voltage Range: 9 ~ 18V DC
Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
Environment Temperature: -20°C ~ 70°C (-4°F ~ 158°F)
Dimension: 118mm*68mm*22.3mm
Weight: <200g (0.44lb)
Languages: English, French, Spanish, Russian, Italian, German and Portuguese
Functions 1: Read code,Clear code
Functions 2: Live data,Freeze frame
Functions 3: I/M readness,Freeze Frame
Functions 4: O2 sensor test
Functions 5: On-Board Monitor
Functions 6: EVAP system
Functions 7: Vehicle Information reading
Color: Black
