Description: Buy as many as you need and the shipping is still just $5.00Please look closely at picture number 8 and you will see that one of these was drilled from 5/64 to 1/8 of an inch. This is very easy to do on any drill press because the brass is soft. You can buy brass axle shaft at any hobby shop in about 20 different diameters and it is very easy to solder one of these gears to the shaft and it is permanent and much more reliable than a set screw. You can also use the permanent red Loctite for another method of attaching the gear to an axle.This listing is for TWO (2) pieces of 16 TOOTH BRASS PINION GEAR made by TRADESHIP. These gears are metric pitch MOD .5 mm As you can see in some of the photos this is a very common pitch that is used on different toys and hobby shop radio controlled items and matching GEARS are very easy to find. These are NOS Sold by Tradeship Manufacturing, San Francisco, CA. Sold BULK with no packaging. Please note that all of the extras that are seen in the photographs are used for illustration and display purposes only. Please note that these gears are currently stored with desiccant packs to control moisture. Some of these may have a very thin layer of brown patina on the brass. This is very easily removed by sliding the gear back and forth on a piece of 600 grit sandpaper. If you pay before noon Eastern time I will mail your package the same day !
Price: 1.5 USD
Location: McCordsville, Indiana
End Time: 2024-05-13T20:35:19.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Tradeship
Type: SPUR GEAR
MPN: 628
Country/Region of Manufacture: Japan
