13pieces OEM Mechanical Keyboard Key Cap Mold Silicone Resin Casting Molds fo...

Description: Specification: When the keyboard is installerd, it is found to be too tight, you can use hair dryer to blow hot air against the keycap cross-section. after the holde is softened, adjust it. if it is too loose, you can use a toothpick to apply a trace of glue to the cross hole to reduce the gap and increase the friction. Type: Epoxy mold Material: Silicone Color: As pictures shown Package Include: Space key*2pcs; Tab key*2pcs; Caps Lock*2pcs; Ctrl*2pcs; Backspace*2pcs; dialer*1pc 【Resin Molds Set】Include 12Pcs keyboard mold and 1pcs dialer 【For what keyboard】Key cap type:OEM, For Cross Axis Keyboard Only: Equipped with cross shaft positioning hole mold cover, our key cap resin mold only fits the cross-axis mechanical keyboard. 【What We Can Do】You can use the silicone casting molds to make your diy special keyboard or keyboard holder. Make full use of your imagination to create your special keyboard or keyboard holder. And use fillers for different themes to define your own diy keyboard, such as sequins, dried flowers, luminous pigments, etc. 【Use】There is a number on each mold. The two molds with the same number are used at the same time,Please match the molds after receiving them frist. 【Note】When making, first fully fill the "cross" part mold with resin, then Pour Resin into the other mold, Finally, cover the "cross" part mold with other molds. Pour enough resin to allow it to overflow. Ensure that there are no bubbles inside the finished product. Keyboard silicone mold you can follow this step: 1. pour the melting resin into the silicone casting mold and fill to the top; 2. wait for the cold process; 3. pop up your design, there is no need for extra cutting and edging, silicone mold with toughness; 4. simple to remove your crafts from the mold.

Price: 26.09 USD

Location: Dallas, Texas

End Time: 2024-12-24T13:14:20.000Z

Shipping Cost: 0 USD