1 GALLON GLOSS SEALER FOR CONCRETE FLOORS, CEMENT TILE, PLASTER, GlossKote

Description: ONE GALLON OF OLDE WORLD "GLOSSKOTE" GLOSS FINISH, STONE AND CONCRETE SEALER. NEED MORE THAN A GALLON? LESS THAN A GALLON? Order quarts and 5 gallon pails of GlossKote Sealer from our Ebay Store. #GLS-128 - USE TO SEAL AND PROTECT STONE, TILE, BRICKS, COBBLESTONE, PAVERS, MAN-MADE, FAUX STONE, VENEER, CEMENT, CONCRETE, AND PLASTER. PROTECTION AND PROVIDES A "GLOSS" FINISH... WITHOUT ALTERING THE BASE COLOR. PRODUCT DESCRIPTION: Olde World GlossKote Sealer is a water-based urethane/acrylic sealer designed for use on interior concrete floors and tile. It provides chemical and abrasion resistance and when cured, provides a sheen to the coated surfaces. It helps protect and prolong the color and appearance of the substrate. Olde World GlossKote provides resistance to UV and black rubber (heal) marks. This easy to apply, water-based, environmentally friendly formula cleans up with water. Top coating with Super-Sealer Wax is recommended. APPLICATION: Apply to clean sound floors. Apply at a rate of 300-600 square feet per gallon. Cleanup with soap and water before material dries. Drying time will depend on temperature… usually ½ to 2 hours. Apply two to three coats for best results, about 2-4 hours apart. Sealer may be applied to a damp or dry surface at temperatures about 50 degrees F. Apply with a sponge, “floating” the surface with the sealer. Apply in one direction, with the second coat in the other direct. (North-South, then East-West). Saturate tile, but do not allow it to puddle on tile surface COVERAGE: Approximately 300-600 square feet per gallon depending on porosity of substrate. CLEANUP: Cleanup with water. Olde World GlossKote Sealer beautifies brick, stone, cementitious tiles, and concrete. It is a water-based, urethane/acrylic sealer designed for use on interior concrete floors and tiles. This non-yellowing formula provides chemical and abrasion resistance, and when cured, provides a sheen to the coated surface. Provides resistance to UV and black rubber (heal) marks. It helps protect and prolong the color and appearance of the substrate from oil, sunlight, etc. OTHER SEALERS AVAILABLE FROM OLDE WORLD: StoneKote: A water-based penetrating sealer that does not alter the appearance of the substrate. MatteKote: A water-based sealer offering protection with a glossy shine. GlazeKote: A solvent-based sealer offering protection with an ultra-glaze, deep, shine. WE ALSO OFFER OUR COLORANTS IN ONE-POUND AND FIVE-POUND BAGS. OR YOU CAN ORDER A SPECIAL "SET OF FIVE" CONSISTING OF ONE POUND, OR FIVE-POUNDS, OF EACH OF OUR FIVE BASE COLORS. EXPLORE OUR "STORE" FOR MOLDS, AND OTHER SUPPLIES. Our molds are made from a special .060 H.I. ABS and can be used hundreds of times if cared for per our simple instructions. COMPLETE INSTRUCTIONS ARE INCLUDED WITH EACH PURCHASE. SEE SHIPPING CALCULATOR FOR YOUR SHIPPING CHARGES. If you must contact our shipping department regarding a shipment that you feel may be overdue, you may email or phone. WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE... Become an "Olde World Tile" Producer Today! Since 1992, we've trained over 200+ entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success! SEE OUR OTHER EBAY LISTINGS AND EXPLORE OUR STORE FOR MORE MOLD STYLES AND SIZES, SUPPLIES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES. For additional product information, tile and stone installation photos, and more... visit our extensive websites, or if you have questions, feel free to call or or email us.

Price: 59.98 USD

Location: Port Charlotte, Florida

End Time: 2024-03-17T23:51:36.000Z

Shipping Cost: N/A USD